|
10.1节选
5 @ u6 x, M% H1 [Each specimen of plug or portable socket-outlet is then pressed between two flat surfaces, I# L6 J2 u' | `, Z1 ^3 S
with a force of 150 N for 5 min, as shown in figure 8. The specimen is checked 15 min after
1 U$ n( a' @3 L8 k- Zremoval from the test apparatus, and shall not show such deformation as it would result in% Q8 Z% o& {# F
undue alteration of those dimensions shown in the relevant standard sheets which ensure9 z; h& u0 |) C j! [9 F
safety.
( `2 o6 ~" T' r: A4 T8 C {" I$ G' }$ L6 j
24.5 The specimens are subjected to a compression test as shown in figure 8, the
) _5 B! r3 J2 u/ K0 V; Itemperature of the pressure plate, of the base and of the specimens being (23 ± 2) °C and the
8 l& X1 d( L& u% b+ t7 p+ qforce applied being 300 N.
0 E$ o/ D/ ?7 E& T4 C7 D3 s# aThe specimens are first placed in position a), as shown in figure 8, and the force is applied for. I5 P' S: I) S* _0 i
1 min. They are then placed in position b), as shown in figure 8, and again subjected to the
. G) }$ K" i4 ]- c; `force for 1 min.& S; I/ B9 Z* @1 t
The specimens are removed from the test apparatus and after 15 min they shall show no
& W1 Z) X; h' w5 x" g! c# Rdamage within the meaning of this standard.
# R" g4 r j8 N; h/ O
4 @9 C9 v& w7 C" W
0 ]9 D+ m2 W1 {' X$ `& V' t问题:clause 10.1所用压力为150N,而clause 24.5所用压力是300N。IEC 60884-1 clause 10.1和clause 24.5关于压力测试各自的目的是什么?
% E% p- k! Q' g. v" R6 T
" B# {3 w0 [" y* t% q |
|