灯具耐压问题

steventsl · 发表于 2010-5-20 10:51

在LED灯具的设计中加入了防雷二极管，但是做电气强度试验到一定电压时就会超漏。厂家解释说灯具的防雷等级还高于耐压1500V。请问下各位，这个原理是什么！

塞北风暴 · 发表于 2010-5-20 10:55

非常关注这个问题，希望有高手给解释

Andy.Yang · 发表于 2010-5-20 11:13

You can
1. Check the surger protector's datasheet to check whether the dielectric performance is higher than the whole product's requirement, if not, I think it's the surge protector's issue;
2. Check if there are some capacitors with low voltage rating, if there are, disassemble them or change the test voltage from AC to DC;
3. Adjust the leakage current setting to higher level, but still within the standard's requirement;
4. If all above proves that there is still a problem when doing this test, then verify the products step by step, try to find out which section or which components can not fulfill the test's requirement, then solve it...

EasonY · 发表于 2010-5-20 16:10

You are great, Andy!

steventsl · 发表于 2010-5-20 16:37

引用第2楼Andy.Yang于2010-05-20 11:13发表的 :3 Y' U! O' x% E/ |& Q
You can , v3 M$ i/ k6 h
1. Check the surger protector's datasheet to check whether the dielectric performance is higher than the whole product's requirement, if not, I think it's the surge protector's issue;
( V+ K! ~) ~# P3 \: r# c. Z1 G$ S2. Check if there are some capacitors with low voltage rating, if there are, disassemble them or change the test voltage from AC to DC;
9 b" c# U# e. k; u2 O3. Adjust the leakage current setting to higher level, but still within the standard's requirement;+ S2 w* z8 z: K& S5 N
4. If all above proves that there is still a problem when doing this test, then verify the products step by step, try to find out which section or which components can not fulfill the test's requirement, then solve it...

多谢多谢基本上找到原因了！

bub01 · 发表于 2010-6-2 10:34

I see!
不过很多人英语不行，最好有中文注解！

lianqd · 发表于 2010-6-2 13:52

很多人英语不行，最好有中文注解！

ASDERW · 发表于 2010-7-22 12:48

英语需要翻译，看起来费劲！！

jxcyf · 发表于 2010-7-22 12:57

引用第2楼Andy.Yang于2010-05-20 11:13发表的 :
- s9 n% q/ m% H! o( ]9 }, uYou can
6 ^% i$ n, f1 v+ }1. Check the surger protector's datasheet to check whether the dielectric performance is higher than the whole product's requirement, if not, I think it's the surge protector's issue;% v6 ~4 y2 {1 F7 f% j* z8 t
2. Check if there are some capacitors with low voltage rating, if there are, disassemble them or change the test voltage from AC to DC;
' y8 }0 k( e0 @" c. n, `3. Adjust the leakage current setting to higher level, but still within the standard's requirement;0 m8 K1 C! q( ?: o3 i* ]* v4 u
4. If all above proves that there is still a problem when doing this test, then verify the products step by step, try to find out which section or which components can not fulfill the test's requirement, then solve it...

最好用中文注解，看E文很伤神

Andy.Yang · 发表于 2010-7-22 13:02

引用第7楼ASDERW于2010-07-22 12:48发表的 :
/ v& l8 |1 Z4 V英语需要翻译，看起来费劲！！

maybe you are right, but there are so many standards related with safety are english version,....

		自动登录	找回密码
密码			注册安规

	安规论坛 \| 仪器设备 \| 求职招聘 \| 国家标准		公告 \| 教程 \| 家电 \| 灯具 \| 环保 \| ITAV		签到充值在线打卡设备		好友\| 帖子\| 空间\| 日志\| 相册
	IP淋雨机 \| 证书查询 \| 规范下载 \| 资质查询		招聘 \| 考试 \| 线缆 \| 玩具 \| 标准 \| 综合		红包邮箱打卡工资禁言		分享\| 记录\| 道具\| 勋章\| 任务

IP淋雨设备\| 恒温恒湿箱\| 拉力机\| 医疗检测设备	沙特Saber 埃及COI 中东GCC｜CoC直接发证机构	水平垂直燃烧机\|灼热丝\|针焰试验机\|漏电起痕试验机
灯头量规\|试验指\|插头插座量规\|灯具检测设备	耐划痕试验机\|可程式恒温恒湿试验箱 \| 耦合器设备	广东安规-原厂生产-满足标准-审核无忧

[GB灯具] 灯具耐压问题

安规网为您推荐 /1