UL 1332电线标识
UL 1332电线的绝缘材料为聚全氟乙丙烯(FEP)，关于上面的印字检查采用何种方法检查？参照何标准？急！请高手指教。 UL 15812556 47 Surface Marking of AWM
47.1 Surface marking is not required for appliance wiring material.
47.2 When surface marking referencing ²AWM² is used, the marking shall contain the following elements:
a) Wire/cable designation: ²AWM.²
b) Name of the organization responsible for the AWM, trade name, other applicable mark, or
file number. When the organization responsible for the AWM produces AWM in more than one
location, an additional distinctive marking shall be provided that identifies the specific
manufacturing location of the AWM.
Other markings such as wire size, number of conductors, and similar data, are determined to be in
compliance with this requirement when they are not confusing or misleading.
47.3 For a cable that contains a conductive polymeric shield, the jacket or marker tape shall be marked
²Conductive Shield,² ²Contains Polymeric Conductive Shield,² or equivalent. UL 1332 是 Organic Coatings for Steel Enclosures for Outdoor Use Electrical Equipment
不是电线标识 試試參攷一下 UL Wire & Cable Marking Guide 2009 -01 版
http://www.ul.com/global/eng/documents/offerings/perspectives/regulators/electrical/newsletters/W&CMG_April2007_Final.pdf LZ所讲的1332就是我们常说的硅胶线，1332只是S0758里面的一个style，http://data.ul.com/link/stylepage.aspx?style=1332 为style PAGE，里面有讲MARKING只作GENERAL的要求，也即只需符合758标准就OK，跟1007的要求是一样的。
页:
[1]
