IEC 60884-1 clause 10.1和clasue 24.5关于压力测试各自的目的是什么？
10.1节选Each specimen of plug or portable socket-outlet is then pressed between two flat surfaces
with a force of 150 N for 5 min, as shown in figure 8. The specimen is checked 15 min after
removal from the test apparatus, and shall not show such deformation as it would result in
undue alteration of those dimensions shown in the relevant standard sheets which ensure
safety.
24.5 The specimens are subjected to a compression test as shown in figure 8, the
temperature of the pressure plate, of the base and of the specimens being (23 ± 2) °C and the
force applied being 300 N.
The specimens are first placed in position a), as shown in figure 8, and the force is applied for
1 min. They are then placed in position b), as shown in figure 8, and again subjected to the
force for 1 min.
The specimens are removed from the test apparatus and after 15 min they shall show no
damage within the meaning of this standard.
问题：clause 10.1所用压力为150N，而clause 24.5所用压力是300N。IEC 60884-1 clause 10.1和clause 24.5关于压力测试各自的目的是什么？
页:
[1]
