LED 台灯 CE 认证 请教
本帖最后由 terry20120318 于 2012-11-27 16:56 编辑Question:
How a product should be marked and/or classified when it consists of a set of:
1. An independent control gear (Class I or Class II) with SELV output
and
2. A luminaire (one or more) which is detachable from the control gear (by hand)?
Decision:
- The independent control gear shall be classified as Class I or Class II;
- The luminaire shall be marked as Class III;
- The whole product may be marked as Class I or Class II on the package. Another way is to mark
the package with the rated voltages of the control gear and the luminaire. Class III marking on the
package may be misleading, and if applied alone, the marking will be incorrect;
- The control gear shall be tested according to Class I or Class II and the luminaire according to
Class III.
Explanatory Notes:
各位前辈，请教下此份决议
从决议看，认证时可以出一份三类灯具证书+一份二类电源证书，然后放在一个包装箱内出货，是这个意思吧，没有讲一定要按整体做一个二类灯具的证书，只是包装箱上做标示即可。
如果是的话，分开出证，有利于公司 以后更换电源供应商。
第二，一份三类灯具证书+一份二类电源证书，放在一个包装箱内出货，欧洲海关会不会认为有问题，
多谢回复
决议解释很详细啊，驱动必须是一类或者二类，灯可以三类，然后组成整体的话，包装上要写驱动的额定电压
楼主的做法是可以的 Nezof 发表于 2012-11-27 10:25 static/image/common/back.gif
决议解释很详细啊，驱动必须是一类或者二类，灯可以三类，然后组成整体的话，包装上要写驱动的额定电压
楼 ...
如果是这样的话，三类灯具做认证是应该没什么可测了，因为低压不在LVD指令内，且灯具内只有一个光源板，也没什么EMC要求了吧，最多测个62471，可以这样理解吗，谢谢
页:
[1]
