|
as below for EN request
1 z( X! _, P7 T& r7 C8 v+ y/ [$ C4 q3 q
5.4 Cords on toys (see A.29)5 ~( b- Y- {: ^+ I- b
Cords shall conform to the following requirements:: o0 B/ c1 ?* [
a) Cords shall have a thickness (smallest dimension) of 1,5 mm or more when tested according to 8.20
/ A) f9 G8 V' ^- Z+ x* Y& |# X(cord thickness). This does not apply to ribbons.% H( l; F, H' g" u% N
BS EN 71-1:2005+A8:2009
: b+ [! H4 g+ Q3 W8 J$ ILicensed copy: Vocational Trading Council, Vocational Training Council, Version correct as of 14/05/2009 08:01, (c)
& O; w% _0 p4 Tb) The free length of cords (e.g. on pull-along toys) which include attachments that can form nooses shall
/ t8 R7 ^( y$ l. P5 ]either:( f! J/ j& X& q; y, v5 H4 f
not exceed 220 mm when stretched by a force of (25 ± 2) N; or
t$ A5 f @7 T) W' |; H when subjected to a force of (25 ± 2) N, separate into parts not exceeding 220 mm when stretched2 f" C7 Y1 q0 F U
by a force of (25 ± 2) N. It shall be possible to join the parts together after they have been separated. S, }* s! S3 [% [) @
without altering the characteristics of the joints (see Figure 10).
! ?4 y; L8 [/ Q Z. R- KThe free length of the cord shall be measured from the fixing point to the end of the cord or to the fixing) ]; v# {, Q. r* Z8 i( K
point on the other part of the toy. If the fixing point has the same shape or form as the cord, this part shall' }0 c$ t% {& Z, N9 v1 h+ s
be measured as a part of the entire cord (see Figure 11).; q; \) l. R/ e' c
c) The perimeter of any nooses on cords shall not exceed 380 mm when stretched by a force of (25 ± 2) N.
2 p: x8 [* J% z: _8 m& Cd) Toys with self-retracting cords shall have a mechanism recoil force less than 10 N.: |4 C& t: X5 ?$ Y5 @
e) Cords intended to be fixed across cradles, cots, perambulators etc., shall not exceed 750 mm when
- u* o# u. `# Rstretched by a force of (25 ± 2) N, and their length under these conditions shall be not more than 40 %longer than their relaxed length. |
|