|
|
1st (twice)' P" K) {' o' [/ j
Detachable parts are removed.. p, M9 n2 @9 H( W$ p
The liquid container of the appliance is completely filled with water containing approximately 1 % NaCl and a further quantity, equal to 15 % of the capacity of the container or 0,25 l, whichever is the greater, is poured in steadily over a period of 1 min.
# f$ y U \8 I6 EIn case of doubt, the spillage test is carried out with the appliance deviating from the normal position of use by an angle not exceeding 5°.) U, a4 L. j( q
% `) G) ?0 t4 l. S" \& v1 w
For cordless kettles, the test with the kettle on the horizontal plane is carried out with the kettle both on and off its stand.6 o3 R# Y) \8 W4 c2 i' F$ _
; a0 k% s- u8 f
' n9 K8 F/ U4 \& H
2nd -- Kettles that can be filled through the spout # b1 b9 { D! U. y7 N: K- `
Detachable parts are removed.
1 f0 c' z) ~" M5 j& v, FTested on a plane inclined at an angle of 20° to the horizontal, with the spout uppermost.$ i) {0 r, @9 T+ e: A
filled with water containing approximately 1 % NaCl to the maximum level, if this indication is visible from the filling position, otherwise until water spills from the kettle.7 |7 G% l& c9 p, F: w- a* E
A further quantity, equal to 15 % of the rated capacity of the kettle, is then added as quickly as possible1 }' c$ I! t% \$ ?0 n/ ?5 \( n, l
Only with the cordless kettle off its stand
# K) ? U; R% n% N8 O0 q
: P( q# p$ r# [& r$ N. u
9 w5 _- L3 J( @( J# L O n+ S" U& V/ E' v
3rd+ b" M( W1 Y! S2 C
Kettles are then filled to rated capacity with water. / G0 q+ Z9 z) W9 `- R
They are placed on a plane inclined at an angle of 20° to the horizontal with their spout facing up the slope of the inclined plane.
5 j; v- f9 W+ l6 _! [' v* G/ sWater shall not be discharged from the kettle
2 X& A8 Q6 Y2 X! s1 k- l* b) ?" ?
# p1 G0 J# g& X
1 n8 z( \' w# @. t9 g/ Q
4th -- Stands for cordless kettles+ |; p, G' }& a$ y3 H& z+ [. T0 B
The stand is placed on a horizontal surface # ?. ~( {) f! t' s/ V' u
30 ml of water containing approximately 1 % NaCl is poured onto the connecting device.
, ]& E3 ~6 }1 [ s9 jThe solution is poured steadily through a tube having an inner diameter of 8 mm over a period of 2 s, the lower end of the tube being 200 mm above the connecting device. 2 v7 r& ^; `! Z6 g2 P" [: h
Judgment：The stand shall then withstand the electric strength test of 16.3, the test voltage for reinforced insulation being 2 500 V. |
|
/1 
|关于安规|小黑屋|安规QQ群|Archiver|手机版|安规网
( 粤ICP13023453-10 ) 
窥视卡
雷达卡
发表于 2010-10-25 14:00
收藏
分享
好帖
鸡蛋
提升卡
置顶卡
沉默卡
喧嚣卡
变色卡
抢沙发
千斤顶
显身卡
楼主