|
請教UL 817 以下標準的中文意思?
" K0 [3 D; K; ^$ i i. c b這抗電弧測試是否只針對連接器呢 ?8 @3 s, G0 @- q3 x4 G5 B, Z6 h
/ Y6 p, n1 |" [5 T. U3 B0 u( _4 |14.7 Resistance to arcing test
5 h9 J) ?# z# c( B+ J; S1 O: p/ G14.7.1 The connector fittings that were subjected to 50 cycles of operation in the Overload test described4 w* g5 l& k* Q% S! r3 r
in 14.4 shall perform acceptably when subjected to an additional 200 cycles of operation under the5 W% L5 q# ~. l8 i5 b% v1 A3 l T
overload test conditions following the temperature test and the repeated retention of plugs test.9 w# [) B& d# s/ m. }$ j8 k! E+ k
14.7.2 Alternatively, six representative connector fittings may be subjected to the 50 cycles of operation
/ s( }) s/ o, n6 k8 w: |+ t% Win the Overload test described in 14.4, followed by the Temperature test and repeated Retention of blades
* }& h0 R/ j3 Otest on the connector fittings, and then, to determine resistance to arcing, a second, previously untested
) [; v; x' c2 Pset of connector fittings may be subjected to 250 cycles of operation under the overload-test conditions.
" _4 P9 x& u' J, s8 o6 H) `14.7.3 The attachment plug used for this test may be changed after every 50 operations. There shall not! \$ l+ F% T6 R6 C7 {. R9 ]" }
be any sustained flaming of the material in excess of five seconds duration. There shall not be any' r& f% J) F, U: p ~2 D5 P7 ?' Z
electrical tracking or the formation of a permanent carbon conductive path that results in a dielectric
+ V) ^- _. h5 f; Kbreakdown, as determined by the application of a 60 Hz essentially sinusoidal potential of 1500 V
9 M, y: T) x p3 d3 G* h |
|