关于EK1 646-16的一些个人理解

sclongwar

广东安规检测
有限公司提供：

小型摆管淋雨试验机

IPX5X6X7喷水试验机

1000L恒温恒湿箱

各种试验指现货

可程式恒温恒湿试验箱

水平垂直燃烧机

自动卷线器试验机

耐划痕试验机

各种灯头量规现货

灼热丝试验机现货

GB1002插头量规

IPX1-X7淋雨现货

IEC61347/UL935镇流器热试验箱

灯具防风罩

IK冲击试验机

UL498插头插座量规

VDE0620插头插座量规

稳定性试验台

家电温升测试角

针焰试验机现货

热电偶焊机现货

家电125mm试验指

E12灯头量规

无绳壶无绳电熨斗插拔寿命试验机

IEC60335试验指甲

最近针对EN 60335-2-14出了一个新的EK1决议， 646-16，主要是针对搅拌机这类产品申请GS的一些变化。

, g  P$ Z2 H1 F' G20.2 The test probes arenot applied to feed openings having a throat with the following dimensions:
; c# w* X- y4 r, h2 T% e这里把a throat with 删掉了，一般的搅拌机没有送料口的，所以这里没什么影响。

For blenders, detachableparts, except lids, are not removed. The test is carried out with a test probesimilar to that of test probe B of IEC 61032 but having a circular stop facewith a diameter of 125mm instead of the non-circular face, the distance between the tip of the test finger and the stopface being 100 mm.

把这段话删掉，这个影响就很大了，之前拿掉杯盖，用测试手指外加一个125mm挡板的手指去碰刀片，现在把125mm的挡板去掉，直接用测试手指去，意味着只能用挡板为50mm，长度为80mm的测试手指B来触碰。对于盖子没有连锁的玻璃杯，塑料杯或者是金属杯来说是影响比较大

" E: a0 U  P3 v; [3 ~
" e0 T6 `! K" F20.112： The cuttingblade of food processors shall stop within 1,5 s after the lid has been openedor removed. Compliance is checkedby operating the appliance without load and at the highest speed.
: K1 B/ J/ X7 O9 B8 V/ C3 k8 U把盖子拿掉，1.5秒刀片要停下来。原来该条款只适用于food processors，现在blender也需要考虑该条款，需要增加刹车装置，保证打开盖子刀片能在1.5s内停止。
' B2 E  a( H" X6 \; w" V% B! B
7 z; ]8 f5 c+ }$ r; C2 i20.113 The lidinterlock of food processors shall be constructed so that accidental operationof the appliance is prevented. Lid interlock switches shall be biased-offswitches.If there is aninterlock between the lid and the main switch, the lid shall be locked when theswitch is in the on position. When the lid is not correctly closed, the switchshall be locked in the off position. Compliance ischecked by inspection, by manual test and by applying test probe B of IEC 61032.
原来该条款只适用于food processors，现在blender也需要考虑该条款，用标准测试手指B不能启动微动开关。

- T5 M3 ?; ?  g$ t/ j20.114Access todangerous moving parts of food processors shall be prevented for allcombinations of assembly of detachable parts that may occur in use.Compliance ischecked by the following test. Detachableparts are removed or assembled incorrectly in a manner that may occur in use, suchas the incorrect location or misalignment of the parts. A force not exceeding5 N is applied to the parts in any direction and it shall not be possible totouch dangerous moving parts with test probe B of IEC 61032
0 @( o; t7 k6 m原来该条款只适用于food processors，现在blender也需要考虑该条款，需要考虑各种配件的不同组合是否能启动产品导致触碰到运动部件的风险。

风险等级：B，进展中的项目立刻执行该决议，已经签发的证书需要在最多6个月内完成变更或者是取消。

- j, w4 J/ N  B5 |2 ?. S* h/ Y6 y1 p; R以上个人见解，有不同观点可以一起讨论。

ylgc123

6 r  v0 c- F' n& T必须上一个连锁开关，通过盖子进行互锁，但是开关的支撑结构有点长啊，杯子小点的估计也有150mm高吧。
搅拌机做GS现在是爽歪歪了~、
3 C4 P5 ~$ b! u: i( A1 D另外现在流行的高速报破壁料理机别说1.5s,估计5.1s都未必挺的下来~

plmijb

不申请GS ，反正还有许多认证可申请。只是需要客户与生产商利益与风险共担。

liscsupor

玻璃杯的搅拌机，基本上难做到了。要求相当高！