|
60335-2-49,CL22.101 有如下要求:; D8 t4 N8 r. O+ m$ C! A, g
For three-phase appliances, thermal cut-outs protecting circuits with heating elements, and d S6 G0 f0 k; N/ T
those for motors of which the unexpected starting may cause a hazard, shall be of the8 V, O- a) J5 b1 x$ s$ s
non-self-resetting and trip-free type, and shall provide all-pole disconnection from related
7 l" t7 }" a' }3 `. ]supply circuits.
9 C* [4 K+ J% RFor single-phase appliances and for single-phase heating elements and/or motors connected( S: f) r- Y( h
between one phase and neutral or between phase and phase, thermal cut-outs protecting
9 ?6 M4 M. r9 X+ F0 ~& Hcircuits with heating elements, and those for motors of which the unexpected starting may
8 c( Y2 \, b Ycause a hazard, shall be of the non-self-resetting and trip-free type, and shall provide at least
- J3 d2 P0 Q8 o, x4 }) _0 B: @one-pole disconnection.
8 s- T* z% [( D7 X& S7 eIf the non-self-resetting thermal cut-out is only accessible after removing parts with the aid* `! h0 b$ L/ ?- B" `
of a tool, the trip-free type is not required.; Z: O3 ^( d9 K
NOTE 1 Thermal cut-outs of the trip-free type have an automatic action, with a reset actuating member, so constructed that the automatic action is independent of manipulation or position of the reset mechanism.
/ v( j# z2 e; f% B2 ~! q[u]Thermal cut-outs of the bulb and capillary type that operate during the tests of Clause 19 | shall be such that rupture of the capillary tube shall not impair compliance with the | requirements of 19.13. | Compliance is checked by inspection, by manual test and by rupturing the capillary tube. | NOTE 2 Care must be taken to ensure that the rupture does not seal the capillary tube. | 7 J/ p. t9 L3 \2 m' c9 @
v/ Y2 j! Y( Q# U: k
我想请教的就是上面红底字。这个实验如何做?割开毛细管的温控器,是割开探头部分(粗点),还是割开毛细管(细点)部分?割开以后,里面的传导介质流失掉,限温器还能起什么作用?做60335-1的CL19.5时候,就相当于干烧了,要符合CL19.3的要求,如果干烧符合要求,还加限温器做什么?$ I/ |0 J3 F) x* r0 U3 ]
- Q1 `; }, i) B" r+ E% Y @
请大家说说 |
|