|
根据EN60335-1中标准的原话:
- W1 v' J H0 {# E( x) k19.11.4 Appliances having a switch with an off position obtained by electronic. I$ I; y+ b* m; c' L
disconnection, or a switch that can be placed in the stand-by mode, are subjected to the tests- p2 A# S6 R3 H9 x, i. v
of 19.11.4.1 to 19.11.4.7. The tests are carried out with the appliance supplied at rated
# m$ n7 k- A- r6 r! u8 svoltage, the switch being set in the off position or in the stand-by mode., u- L# j# @2 D
Appliances incorporating a protective electronic circuit are subjected to the tests of$ c8 `% \5 n! i$ m8 u M0 k2 F
19.11.4.1 to 19.11.4.7. The tests are carried out after the protective electronic circuit has
& D# }6 `5 W! @0 Koperated during the relevant tests of Clause 19 except 19.2, 19.6 and 19.11.3. However,
$ z" c1 x( U1 K; U: bappliances that are operated for 30 s or 5 min during the test of 19.7 are not subjected to the
1 R0 `3 C8 s) p3 ~+ w, utests for electromagnetic phenomena.
. B5 N% T* P! lThe tests are carried out with surge arresters disconnected, unless they incorporate spark gaps.8 R6 L* k5 E5 w2 E0 p1 ^! o
NOTE 1 If the appliance has several modes of operation, the tests are carried out with the appliance operating in each mode, if necessary.
+ u2 R/ ]; |0 YNOTE 2 Appliances incorporating electronic controls complying with the IEC 60730 series are not exempt from the tests.
1 o" e7 A) H# Y1 J+ \+ c4 G( S! N4 F H) U! _3 |+ L3 f2 V q
而19.11.4.1 到 19.11.4.7.分别是做IEC61000的测试,其中就有-4-2和-4-5的雷击测试。是针对所有待机类产品的附加测试,测试的时候需要拆除压敏电阻,除非与之有相关联的放电管。 |
|