DSH 558 Identification of Critical Components – Minimum description criteria

小米 · 发表于 2012-11-6 14:37

Identification of Critical Components – Minimum description criteria

1.5.1

60950-1(ed.1) & 60950(ed.3)

Standard(s):
IEC 60950, 3rd Ed (1999)
IEC 60950-1, 1st Ed. (2001)
Sub clause(s):
1.5.1
DSH - 558
Page 1 (3)
Subject:
Identification of Critical
Components – Minimum
description criteria for disk
drives
Key words:
Components
Decision confirmed
by CTL at its 42nd
meeting 2005 in
Cancun
Question:
Within an IECEE CB Report for an end product that contains a component disk drive(s)
(e.g., CD-ROM, CD-RW, DVD, Hard, Floppy, Tape), if the disk drive(s) has its own
certification to IEC 60950 (-1), is it acceptable to identify such a critical component by
technical data, standard, and mark(s) of conformity, as in the example below, without
specifying manufacturer’s name and type number for each component?
Decision:
For component disk drives covered by a CB Test Report and Certificate, there are two
options for component descriptions, depending on the type of disk drive:
1. Non-laser based drives – The parts list should state "Mfr: Company A or equivalent," and
"Model: Model B or equivalent," so there is traceability for the construction of the
sample tested. The description should also include the technical data (input voltage
rating, load current rating, flammability rating of the bezel), standard, and mark of
certifying body/organization.
2. Laser based drive - The parts list should state: "Mfr: Company A or equivalent", and
"Model: Model B or equivalent," so that there is traceability (to IEC60950-1 and
applicable laser requirement(s)) for the construction of the sample tested. The description
should also include technical data (input voltage rating, load current rating, flammability
rating of the bezel, and, when applicable, laser classification), and standard, and indicate
that the component is covered by a CB Test Report and Certificate.
Object/part No.
Manufacturer/ trademark
Type/model
Technical data
Standard
Mark(s) of conformity1)
Tape Drive
(Mfr. Name) or equivalent
(Type No.)
or equivalent
5 Vdc, 1.2 A
12Vdc, 0.5A
Bezel min. 2.5 mm thick, rated min.V-1.
IEC/EN/60950
CSA/UL60950
-mark of certifying body
Hard Drive
(Mfr. Name) or equivalent
(Type No.) or equivalent
5 Vdc, 1.0 A
12 Vdc, 0.4A
No bezel provided.
IEC/EN/60950
CSA/UL60950
-mark of certifying body
CD-ROM
(Mfr. Name) or equivalent
(Type No.) or equivalent
5/12 Vdc, 1.0/0.3A
Bezel rated V -1.
Class 1 laser product.
IEC/EN/60950
CSA/UL60950
IEC/EN 60825-1
21 CFR 1040
-IECEE CB Scheme Certificate and Test Report.
DVD Drive
(Mfr. Name)
or equivalent
(Type No.) or equivalent
5 Vdc, 1.0 A
12Vdc, 0.4A;
Class 1M laser product.
Bezel min. 2.5 mm thick, rated min.V-1.
IEC/EN/60950
CSA/UL60950
IEC/EN 60825-1
21 CFR 1040
-IECEE CB Scheme Certificate and Test Report.
For a rare case when a device is used in an application where the standard requires a more
complex set of requirements to be applied, or the evaluation is part of the end product
evaluation, the manufacturer’s name and type number, in addition to the technical
information, shall be described/controlled for each component.

		自动登录	找回密码
密码			注册安规

	安规论坛 \| 仪器设备 \| 求职招聘 \| 国家标准		公告 \| 教程 \| 家电 \| 灯具 \| 环保 \| ITAV		签到充值在线打卡设备		好友\| 帖子\| 空间\| 日志\| 相册
	IP淋雨机 \| 证书查询 \| 规范下载 \| 资质查询		招聘 \| 考试 \| 线缆 \| 玩具 \| 标准 \| 综合		红包邮箱打卡工资禁言		分享\| 记录\| 道具\| 勋章\| 任务

IP淋雨设备\| 恒温恒湿箱\| 拉力机\| 医疗检测设备	沙特Saber 埃及COI 中东GCC｜CoC直接发证机构	水平垂直燃烧机\|灼热丝\|针焰试验机\|漏电起痕试验机
灯头量规\|试验指\|插头插座量规\|灯具检测设备	耐划痕试验机\|可程式恒温恒湿试验箱 \| 耦合器设备	广东安规-原厂生产-满足标准-审核无忧

[OFF] DSH 558 Identification of Critical Components – Minimum description criteria

本帖子中包含更多资源

相关帖子

安规网为您推荐 /2