:2009:076:0003:0016:EN:pdf | EC No. 244/2009 & EC No. 245/2009 have entered into effect as of 13 April 2009 |
| Sunday, 31 May 2009 11:36 | ||||||||||||||||||||||||||||||||
| Eco-design requirements for non-directional household lamps (EC No. 244/2009) and fluorescent lamps without integrated ballast, high intensity discharge lamps and ballasts and luminaries able to operate such lamp (EC No. 245/2009) have entered into effect as of 13 April 2009. Non-directional Household Lamps * Z+ N Y) v" ]( _ On 24 March 2009, the European Commission published Commission Regulation (EC) No. 244/2009 for implementing EuP Directive 2005/32/EC with regard to ecodesign requirements for non-directional household lamps, which took effect from 13 April. The Regulation, composed of 8 articles and 4 annexes, sets forth ecodesign requirements in terms of rated lamp lifetime, lumen maintenance, number of switching cycles before failure, premature failure rate, starting time, color rendering (Ra), luminous efficacy, and product-information requirements on such lamps. * O7 G3 @" o/ } ~+ U! X 5 q2 z2 D8 { L Lamp-efficacy requirements will be implemented in a six-stage approach to provide a sufficient timeframe to phase out less-efficient lamps. 1 m6 v! N# B( J* E. O) S) j z' c6 Y( ?$ u5 H# \! z Starting from the first stage, effective from 1 September 2009, the lamp-efficacy requirements are as follows: 1 G n6 U& H* K* L, ]8 h3 k
! I# A; w+ W- q" Z8 @9 E Fluorescent Lamps without Integrated Ballast, High Intensity Discharge Lamps and Ballasts and Luminaries able to operate such Lamp On 24 March the EU also released Commission Regulation (EC) No. 245/2009 for implementing ecodesign requirements for fluorescent lamps without integrated ballast, for high-intensity discharge lamps, and for ballasts and luminaires able to operate such lamps, which also became effective on 13 April. This Regulation will replace Directive 2000/55/EC in regard to energy-efficiency requirements for ballasts for fluorescent lighting one year after entry into force. % E; Q4 ^ T* X* L Regulation (EC) No. 245/2009, composed of 9 articles and 7 annexes, offers the following definitions: ! ~0 ]4 B6 g; w) |2 M+ x7 f • Fluorescent lamps without integrated ballast means single- and double-capped fluorescent lamps without integrated ballast; $ V$ G+ j( {: Z) b5 C • High-intensity discharge lamps means electric-discharge lamps in which the light-producing arc is stabilized by wall temperature and the arc has a bulb wall loading in excess of 3 watts per square centimeter. The ecodesign requirements will be enforced in a 3-stage approach, respectively from 1, 3, and 8 years after entry into force. Effective from 13 April 2010 (stage 1), lamps of all types must meet 100h initial value of rated minimum efficacy values (lm/W), depending on lamp type and nominal wattage, and colour render index (Ra) ≦80. For ballast efficiency, the power consumption of the fluorescent-lamp ballasts shall not exceed 1.0 W when operated lamps do not emit any light in normal operating conditions. 8 G% q2 X/ E" ]9 E1 G2 u For products exempted from these requirements, please refer to the table below.
| ||||||||||||||||||||||||||||||||
| EC No. 244/2009 & EC No. 245/2009 have entered into effect as of 13 April 2009 |
| Sunday, 31 May 2009 11:36 | ||||||||||||||||||||||||||||||||
| Eco-design requirements for non-directional household lamps (EC No. 244/2009) and fluorescent lamps without integrated ballast, high intensity discharge lamps and ballasts and luminaries able to operate such lamp (EC No. 245/2009) have entered into effect as of 13 April 2009. Non-directional Household Lamps - v+ |' |3 _# \ On 24 March 2009, the European Commission published Commission Regulation (EC) No. 244/2009 for implementing EuP Directive 2005/32/EC with regard to ecodesign requirements for non-directional household lamps, which took effect from 13 April. ' u0 Z8 t& z6 l/ v& Z/ t! R The Regulation, composed of 8 articles and 4 annexes, sets forth ecodesign requirements in terms of rated lamp lifetime, lumen maintenance, number of switching cycles before failure, premature failure rate, starting time, color rendering (Ra), luminous efficacy, and product-information requirements on such lamps. ! b, \4 C7 b6 ^0 ~1 m0 g9 U 7 h9 M, `& B( C8 D/ e5 b Lamp-efficacy requirements will be implemented in a six-stage approach to provide a sufficient timeframe to phase out less-efficient lamps. ( s6 a% Z- [& m% r Starting from the first stage, effective from 1 September 2009, the lamp-efficacy requirements are as follows: ) d8 Q/ w# y6 M6 N& `8 ]: j# B
* X, p- x" @ S4 e0 y Fluorescent Lamps without Integrated Ballast, High Intensity Discharge Lamps and Ballasts and Luminaries able to operate such Lamp On 24 March the EU also released Commission Regulation (EC) No. 245/2009 for implementing ecodesign requirements for fluorescent lamps without integrated ballast, for high-intensity discharge lamps, and for ballasts and luminaires able to operate such lamps, which also became effective on 13 April. This Regulation will replace Directive 2000/55/EC in regard to energy-efficiency requirements for ballasts for fluorescent lighting one year after entry into force. " \* j+ t) G; u# p4 w1 { Regulation (EC) No. 245/2009, composed of 9 articles and 7 annexes, offers the following definitions: : p( C- d w, H! d • Fluorescent lamps without integrated ballast means single- and double-capped fluorescent lamps without integrated ballast; 8 [+ g9 x O2 p" w9 B • High-intensity discharge lamps means electric-discharge lamps in which the light-producing arc is stabilized by wall temperature and the arc has a bulb wall loading in excess of 3 watts per square centimeter. The ecodesign requirements will be enforced in a 3-stage approach, respectively from 1, 3, and 8 years after entry into force. Effective from 13 April 2010 (stage 1), lamps of all types must meet 100h initial value of rated minimum efficacy values (lm/W), depending on lamp type and nominal wattage, and colour render index (Ra) ≦80. For ballast efficiency, the power consumption of the fluorescent-lamp ballasts shall not exceed 1.0 W when operated lamps do not emit any light in normal operating conditions. * i! C2 }8 W, q; h7 F 4 U: C0 y- }8 l, |3 b7 { For products exempted from these requirements, please refer to the table below. / D( w/ x% s! J/ c: q" k/ R' ^
| ||||||||||||||||||||||||||||||||
| 欧盟法规244/2009和欧盟法规245/2009已于2009年4月13日生效 |
| 周日, 2009年 05月 31日 10:41 | ||||||||||||||||||||||||||||||||
| 非定向家用灯之生态化设计指令（欧盟法规244/2009）及不含稳压安定器之萤光灯管、高强度气体放电灯、稳压安定器与灯具之生态化设计指令（欧盟法规245/2009）已于2009年4月13日生效。 - { n$ U2 B# T* i! R V 8 l: ?7 z9 ~7 q2 o8 E/ _. e2 L4 j 非定向家用灯 , Z) I) [3 O A a$ _, K" K0 Q 2009 年 3 月 24 日，欧盟公布欧盟法规 244/ 2009。欧盟法规 244/2009 共 8 条文 4 个附件，对于非定向家用灯的生态化设计要求，包含了额定寿命、光通维持率、报废前开关周期次数、过早报废率、启动时间、显色指数、能效指标与制造商应提供的产品资讯给予明确规定。 6 I- Q& Z" t1 v" a1 z6 `0 g7 _ 5 E2 w9 `. |0 T! w7 a! h7 ~, O9 _ 在光效能部分，则分为六个阶段来执行，给予阶段性的缓冲期限，以逐步汰换光效能不佳的照明产品。 , w4 l- F4 T7 ` 非定向家用灯的光效能要求如下表所示，第一阶段将于 2009 年 9 月 1 日开始： # l5 K2 U( o3 y' t; I3 N9 Y
不含稳压安定器之萤光灯管、高强度气体放电灯、稳压安定器与灯具 欧盟于同一天发布欧盟法规245/2009：不含稳压安定器之萤光灯管、高强度气体放电灯、稳压安定器与灯具的生态化设计要求，同样自 4 月 13 日生效。本执行措施的发布并促使原 2000/55/EC 指令撤销。 / N' m y/ @. V$ A' H ( F8 N3 ~/ b" c 5 ]. {9 u* {) b. S) U" n 欧盟法规245/2009 共 9 条文 7 个附件，对于不含稳压器之萤光灯管的定义包含单端与双端之萤光灯，而高强度气体放电灯则是指发光电弧由管壁温度建立，并且发光管表面负荷超过每平方厘米 3 瓦的电子放电灯。 5 d' Y4 @$ Z t: m 本执行措施区分为三个阶段，分别是法案生效後一年、三年与八年。法规生效後一年（即2010 年4 月13 日）起，不同型态的灯，在不同瓦特数下，需符合各类灯之100 小时额定光效能（lm/W）初始值要求、显色指数（color rendering index (Ra)）至少需达 80；稳压安定器则是当灯管不发光时，能源消耗不得超过 1W。不适用本执行措施的排外项目如表下所示。 ' k5 _& J6 {, ]2 ]. u3 _3 M2 i 不适用本执行措施的排外项目如表下所示： 8 J) L/ ~; Q" _
| ||||||||||||||||||||||||||||||||
| 欢迎光临 安规网 (http://bbs1.angui.org/) | Powered by Discuz! X3.4 |