版主的解说是很正确的。打结是需要有些技巧的，打好先用手拉拉，再测试。作者: Morsta 时间: 2009-4-20 16:14
IEC/EN/GB 60598-1 clause 5.2.10 提到电源线需要使用cord anchorage ，摘录如下：- z' ~" k8 W. w
5.2.10 Luminaires provided with or designed for use with non-detachable flexible cables or cords shall have a cord anchorage such that the conductors are relieved from strain, including twisting, where they are connected to the terminals, and such that their covering is protected from abrasion. It shall be clear how the relief from strain and the prevention of twisting is intended to be effected. For luminaires supplied without a cable or cord, suitable test cables or cords of the largest and smallest sizes recommended by the luminaire manufacturer shall be used for the tests. 1 h( F1 z1 B) ~$ gIt shall not be possible to push the flexible cable or cord into the luminaire to such an extent that the cable or cord is subjected to undue mechanical or thermal stress. Methods such as tying the cable or cord into a knot or tying the ends with string shall not be used. , a2 @& O4 E& F: y0 i" Z+ zCord anchorage shall be of insulating material or be provided with a fixed insulating lining if an insulation fault on the cable or cord could make accessible metal parts live.作者: boblong 时间: 2009-4-21 10:45
打結注意：1是不能太鬆，不然很容易散開失效；. V$ K+ r6 y( T
2是打結位置，預留的線長要足夠，不然結還未到位，接線已被拉掉了。作者: peter1715 时间: 2009-4-22 20:34
建议用线扣作者: Samjxh 时间: 2013-12-25 11:41
打结 欧规是不接受的，国标一样一样的