安规网

标题: 安规mark 铭板标贴要求--2 ，澳洲塞尔维亚，乌克兰，俄罗斯等等 [打印本页]

作者: demon_life 时间: 2014-4-23 12:26
标题: 安规mark 铭板标贴要求--2 ，澳洲塞尔维亚，乌克兰，俄罗斯等等
本帖最后由 demon_life 于 2015-7-22 13:37 编辑

很久之前发过一个关于产品铭牌上安规logo 的帖子，看见很多人都在关注这个而且要求补充，呵呵，刚好趁着现在不忙，我继续把我搜集研究的贡献给大家。
先来澳洲的RCM ：

澳洲标准AS-NZS 4417.1-2009--General rules for use of the mark 是专门针对 RCM label要求的。
现在最新的是AS NZS 4417.1-2012了，这个里面已经不要求加上证书号和当地代理商信息了，只有RCM 就可以了。
该文件中解释了RCM 的意义，误用需要承担的责任，制作方式，颜色，尺寸等等。
制作RCM 的方式：
The RCM and supplier identification shall be durably applied by any suitable means such as Printing，painting，moulding， etching and engraving reproduction. Reproduction shall be legible with normal or corrected to normal vision and no smaller than 3mm in height for the RCM and 1mm in height for supplier identification, for the life of the product, and small conform to the specification given in Clause 3.3. The RCM maybe reproduced in any colour.
RMC 的颜色：The RCM maybe reproduced in any colour
特别要注意：
该要求规定的RCM的尺寸，不得小于3mm，同时进口商代码NXXX 等高度不得小于1mm

[attach]86516[/attach]

[attach]86515[/attach]
我手上有原始AI 格式RCM 原档，网站上传不了，呃，有需要的站内联系我吧

作者: demon_life 时间: 2014-4-23 12:27
本帖最后由 demon_life 于 2014-4-23 13:01 编辑

Serbia 塞尔维亚:

塞尔维亚官方发布通知 2012年1月1号后出口到该国的电气产品几乎都需要COC声明，COC 包含 EMC 和LVD 两部分的要求，跟CE 差不多。
安全用CB 去转，EMC 用CE 报告即可。

具体mark 要求可以参加"Regulation on the manner of placing certificaton marks on products and use of certification marks"
("Official Gazette of RS" no. 25/2010), with the Serbian mark of conformity.

Serbian mark of conformity contains three letters A that make equilateral triange (3A) and looks as
it follows:

[attach]86517[/attach]

Conformity mark must be at least 5 mm high.
Bellow the mark is unique number of notified body "Kvalitet" (И005). The two digits on the right
bellow the mark are last two digits of the year when the document of conformity is issued for that
product.

该logo 下方是年份，这个数字每年发生变化。证书是那年发的就需要对应的年份，今年的就会14拉

官方文件还要求：
此mark 要清晰可见，不能张贴于能被轻易移除的部件上面。
The manufacturer or its representative, or importer if the manufacturer or its representative is not
registered in the Republic of Serbia, puts Serbian mark of conformity on the product in a visible
place so that mark must be legible and indelible and clearly visible, preferably on the same label
with the other data. The mark should not be placed on the parts that are removed when repairing or
servicing of products.

塞尔维亚还有一种是针对认证模式的mark ，这个可能有朋友也需要。
[attach]86519[/attach]
我手上原始格式的mark，有cdr，AI, QPS的，呃，花了我老久在官网上面找到的。但是上传不了这种格式的文件，有需要的站内联系我吧。

作者: demon_life 时间: 2014-4-23 12:29
占板凳。。。。。。。

作者: demon_life 时间: 2014-4-23 12:29
本帖最后由 demon_life 于 2014-4-24 12:10 编辑

日本 VCCI
The Regular Member shall put the following statement or mark on a Class A ITE or Class B ITE. For equipment with information display device “electronic way of display” can be employed for the following marking
1. CLASS A ITE：
A Class A ITE shall have the following warning statement in a conspicuous location on each product. If direct marking on the product is difficult, a tag for warning can be used
[attach]86560[/attach]
Translation:
This is a Class A product.
In a domestic environment this product may cause radio interference, in which case the user
may be required to take corrective actions.

Note 1: The characters shall not be less than 2 mm high. If adequate space is unavailable,
the character size may be reduced as long as the characters are readable.
Note 2: VCCI-A means that the equipment satisfies the limits of interference for Class A ITE.

2. Class B ITE:

A Class B ITE shall have the following mark in a conspicuous location on each product:
[attach]86561[/attach]
3. Equipment registered based on the confirmation measurement at the user installation site
A Regular Member shall put the following statement in a conspicuous location on the
product that was registered based on the confirmation measurements performed at the user
installation site:
[attach]86559[/attach]
Translation:
This is a product for which interference was measured and confirmed to comply at the
present installation site. When this equipment is used at any other location, interference
must be measured at the new location for compliance.

4. Optional device
For optional device A, the required mark and the statement for Class A ITE or Class B ITE
whichever applicable shall be affixed, according to the classification of the optional device
(refer to clauses 1, 2, or 3 of this article). If marking on the product is difficult, the mark
and the statement may be omitted. The mark and the message are not required for optional
device B.

Article 11 (Information in Instruction Manuals) ，对说明书也有要求如下：
For ITE, a Regular Member shall supply the following warning statement in instruction manuals
or equivalents : For Class B ITE, however, its omission is permissible.
For ITE that is registered based on the result of the confirmation measurements at the user's installation site, the Regular Member shall add the warning statement shown in clause 3 in the instruction manual to the user
a. Class A ITE
[attach]86562[/attach]
Translation:
This is a Class A product based on the standard of the VCCI Council. If this equipment is
used in a domestic environment, radio interference may occur, in which case, the user may
be required to take corrective actions

b. Class B ITE
[attach]86563[/attach]
Translation:
This is a Class B product based on the standard of the VCCI Council. If this is used
near a radio or television receiver in a domestic environment, it may cause radio
interference. Install and use the equipment according to the instruction manual.

c.Equipment registered based on the confirmation measurement at the user installation site
[attach]86565[/attach]
Translation:
This is a product for which interference was measured at the present installation site and
confirmed to comply with the standard of Voluntary Control Council for Interference by
Information Technology Equipment (VCCI). Before using the equipment at any
location other than the present installation site, the member shall measure interference for
confirmation and register the result to VCCI.

4.Optional device
For optional device A, the appropriate statement or mark shall be marked as required for
Class A ITE or Class B ITE, according to the classification of the optional device class.
For optional device B, such information is omitted.

作者: demon_life 时间: 2014-4-23 12:40
占位置。。。。。。。。。。。。。

作者: demon_life 时间: 2014-4-23 12:56
占位置先。。。。。。。。。。。。。。。。。。。。。。

作者: demon_life 时间: 2014-4-23 12:58
占位置先。。。。。。。。。。。。。。。

作者: demon_life 时间: 2014-4-23 13:05
本帖最后由 demon_life 于 2014-4-23 13:07 编辑

UL mark 大全：

不知道有没有人注意到UL 官网上面有所有原格式的UL mark
大家可以自己去下载。
路径如下：
http://www.ul.com/global/eng/pag ... l/ulmarks/mark/art/

作者: xiaodeng 时间: 2014-4-23 13:08
楼主好人啊。希望多点关于标签的知识，好方便学习！

作者: demon_life 时间: 2014-4-23 13:09
本帖最后由 demon_life 于 2014-4-23 13:16 编辑

乌克兰 Ukraine

乌克兰目前我见到有两种，一种是整个圈圈的，一种4/3圈的，俄罗斯的网站都是俄文，目前我还没有找到英文版本的，但是我有跟认证代理咨询过两种都可用，但是我建议还是用4/3圈的mark 为好。

乌克兰尺寸最小 H=0.5mm

[attach]86521[/attach][attach]86520[/attach][attach]86522[/attach]

作者: demon_life 时间: 2014-4-23 13:10
俄罗斯 GOST

作者: demon_life 时间: 2014-4-23 13:17

xiaodeng 发表于 2014-4-23 13:08
楼主好人啊。希望多点关于标签的知识，好方便学习！

别插楼。。我还要发呢。。

作者: demon_life 时间: 2014-4-23 13:18
本帖最后由 demon_life 于 2014-4-24 15:07 编辑

  海关联盟 EAC--俄罗斯/哈萨克斯坦/白俄罗斯
自2013年2月15号起，俄罗斯，白俄罗斯，哈萨克斯坦凡属于海关联盟CU-TR 管制目录的产品，必须申请CU-TR 认证，标志就是EAC。

讨厌这个的原因是找不到英文版的资料，都是俄文的。。

有两种格式，白底黑字或者黑底白字。但是不是绝对这两种颜色，下面的俄罗斯文翻译过来应该是可以用有对比的颜色。

EAC 最低要求：不得小于5mm Базовый размер должен быть не менее 5 мм.

[attach]86523[/attach]
[attach]86524[/attach]
ЕАС расшифровывается как Евразийское соответствие (Eurasian Conformity Размеры единого знака обращения должны гарантировать четкость его элементов и их различимость невооруженным глазом на общем цветном фоне объекта.    大概意思是说要保证标志清晰且能合背景底色区别即可，

Единый знак обращения может быть выполнен любым способом, обеспечивающим четкое и ясное его изображение в течение всего срока службы продукции.  这句话大概翻译是说可以任意方式只要清晰，明确即可。

作者: sophieaplus 时间: 2014-4-23 13:46
謝謝^^

受益良多呢

作者: demon_life 时间: 2014-4-23 13:52
本帖最后由 demon_life 于 2014-4-23 14:07 编辑

中国Rohs标志

中国ROHS 标志的要求来源于 SJ/T11364—2006 电子信息产品污染控制标识要求里面含有两种图案

下面橙色中的数字仅是示例，具体数字使用是应替换成电子信息产品相应的环保期限，比如30年

[attach]86526[/attach]
               图1

该文件规定了图形的颜色：
如果电子信息产品颜色与图示标志的推荐颜色相近使其显得不够清晰、或图示标志的颜色影响产品的整体美观，也可以使用其他适当的醒目颜色，其中模塑的可以与制品颜色相同

其中图2 数字字体为Impact，数字高度与圆环内外直径之比为5:8:12
5.4.2 生产者或进口者应根据电子信息产品及部件的大小选择适宜规格的标志，其最小面积不得小于5mm×5mm

5.5.1 采用图1进行标识的，电子信息产品污染控制标志可以选择模塑，喷涂，粘贴，印刷的方法直接标识在产品上，也可以选择在产品说明书中予于以注明
5.5.2 采用图2 进行标识的，若电子信息产品最大表面的面积大于或等于5×103mm2 且形状
规则，电子信息产品污染控制标志应以模塑、喷涂、粘贴、印刷的方法直接标识在电子信息
产品上；若电子信息产品最大表面的面积小于5×103mm2 或形状不规则，可以不在产品表面
直接标识电子信息产品污染控制标志，但应在产品说明书中予以注明。
注：形状不规则产品如表面积很大但特别细长的线缆等
[attach]86525[/attach]
[attach]86528[/attach][attach]86527[/attach]

作者: demon_life 时间: 2014-4-23 14:07
休息会，待会再发。。。

作者: 麦子-tmac 时间: 2014-4-23 15:18
楼主好人，楼主下辈子美利坚 mxia602792962@163.com

作者: Andy.Yang 时间: 2014-4-23 15:37
good summary...

作者: 黄晖 时间: 2014-4-24 08:48
楼主好人啊。希望多点关于标签的知识，好方便学习！

作者: chocochang968 时间: 2014-5-9 23:07
各种收藏，楼主辛苦了，开始学习

作者: lovening00 时间: 2015-3-6 11:13
很全面，很有用。

作者: lovening00 时间: 2015-3-6 11:14
上边说的原档的文件可否方便帮忙发danielwang1020@163.com 里。非常感谢。

作者: demon_life 时间: 2015-3-6 14:43

lovening00 发表于 2015-3-6 11:14
上边说的原档的文件可否方便帮忙发里。非常感谢。

不能留邮箱地址。。

作者: kurtliang 时间: 2015-5-3 13:51
Thanks for sharing

作者: wybbk 时间: 2015-5-4 10:29
楼主，最近刚看了4417.1-2012版本，在新版本中，已经没有Supplier信息的要求，请看下面的内容，是不是表示RCM LOGO使用时不需要增加供应商号码，或证书编号什么的？
The RCM, brand and model identification as specified in 4.2 (b) and (c) shall be durably applied to the equipment by a suitable means such as printing, painting, moulding, etching or engraving. Reproduction shall be legible with normal or corrected to normal vision and shall be at least 3 mm in height (H in Figure 2) for the RCM and at least 1 mm in height for the brand name and model designation or type reference.

作者: demon_life 时间: 2015-6-4 21:09

wybbk 发表于 2015-5-4 10:29
楼主，最近刚看了4417.1-2012版本，在新版本中，已经没有Supplier信息的要求，请看下面的内容，是不是表示R ...

这个新版的确实把这里删掉了，用了 brand 代替，然后在4.2 b c 里面详细解释了。

4.2 Identification of responsible supplier and equipment
(a) Responsible suppliers of equipment marked with the RCM must register their details
on the EESS national database under EESS regulations for the purpose of
identification. The EESS national database is located at www.erac.gov.au.
NOTE Suppliers of equipment currently registered with Standards Australia for the use of the RCM shall register
with the EESS national database before 31 August 2013 if they are supplying products marked with the RCM
beyond that date.
(b) When a responsible supplier uses the RCM on Level 3 equipment or Level 2
equipment as defined in AS/NZS 4417.2 the equipment shall be marked with a brand
name and model designation or type reference and this information shall be registered
by the responsible supplier on the EESS national database where required by
legislation.
(c) When a responsible supplier uses the RCM on Level 1 equipment as defined in
AS/NZS 4417.2, the equipment shall be marked with a brand name and model
designation or type reference.

作者: kuzhuan2008 时间: 2016-3-19 23:07
好东西,学习了

作者: 热爱学习 时间: 2016-10-9 10:07
很好的总结，楼主不打算继续了么？

作者: sophieaplus 时间: 2016-11-11 16:06

学习长知识了
谢谢分享！非常感谢版主

欢迎光临安规网 (http://bbs1.angui.org/)