安规网

标题: DSH 440 Short-circuit of motor capacitors [打印本页]

---

作者: admin    时间: 2012-9-14 13:07
标题: DSH 440 Short-circuit of motor capacitors

DSH 440

Short-circuit of motor capacitors + S: \$ O8 ]% O

19.7

60335-1(ed.3) ; D  B( L* [' C& ^3 s$ f# p6 X

* C$ l- m0 H7 M1 SStandard: IEC60335-1:1991, 3rd Ed.
Sub-clause: 19.7
Sheet No. DSH-440
$ D& w4 b8 T: T0 lSubject: Short-circuit of motor capacitors
  l. Y, }. z. n7 o: qKey words: -short circuit   -motor capacitor
Decision taken at the 40th CTL meeting 2003.
Question:
TC 61 requested CTL to clarify the test procedure for short-circuiting capacitors in accordance with Sub
/ i1 H7 l8 P/ l- ~clause 19.7 of IEC 60335-1.
Decision:
If the design of the circuit is such that short-circuiting of one capacitor will result in the short-circuiting
of the second capacitor, only one capacitor needs to be short-circuited. This is endorsed by the sub clause
4.3 that states “If it is evident from the construction of the appliance that a particular test is not
applicable, the test is not made”.
5 |+ Z  y5 |5 J* b- oThe followings are examples of the circuits.
In the Example A:
; h1 n1 W0 q. E6 t: vShort-circuit of capacitor (Cb) terminals is necessary according to the requirements. For the
capacitor (Ca), short-circuit of its terminals when motor is running is not necessary because
the circuit is opened (the switch is opened).
Also short circuit of its terminals (Ca) when the motor starts is not necessary because it is
: d( `, `8 a$ dalready covered by the short-circuit of Cb terminals.
8 R/ l. |+ y1 z. J; L( m/ y) cIn the Example B:
Only one short-circuit, either Cb1 or Cb2 terminals, is necessary because the testing of one
1 l9 [) S5 w" P* xcovers the testing of the other one. Also the short-circuit of Ca terminals is not necessary
because of the reason stated in the Example A.

[attach]75938[/attach]
: y% _2 T0 n( m, p7 K3 q1 {; {* E

---

欢迎光临 安规网 (http://bbs1.angui.org/)

Powered by Discuz! X3.2