关于三相设备的漏电流测试的疑问
UL60950-15.1.5
When testing three-phase equipment, any components used for EMC purposes and connected
between line and earth are disconnected one at a time; for this purpose, groups of components
in parallel connected through a single connection are treated as single components. Each time
a line-to-earth component is disconnected the sequence of switch operations is repeated.
大家是怎么去断开电容的？
通常一般人的习惯操作是直接缺相来实现，当三相平衡时，断任何一相都一样，当不平衡是怎么处理，该段哪一相？
自己的理解是断相线和地之间Y电容最少的一相。 大家都是这样操作的？ 同问,有经验的秀秀呀 我做过三相的设备，但是不是按照这个标准做的，我说下我的做法：三相都做，取最大值。
页:
[1]
