xiaosu2659 发表于 2011-9-15 09:58

嵌入式灯具

    谁能指点下：嵌入式灯具需要做哪些安规检测？哪个标准是关于嵌入式灯具的？
在此感谢之至！

voicetoyou 发表于 2011-9-15 10:08

UL1598！

wwnw_007 发表于 2011-9-15 10:17

请楼主说明目的地！美洲如1 楼，欧洲EN60598-1和EN60598-2-2，CCCGB7000.1和GB7000.202.

xiaosu2659 发表于 2011-9-15 10:24

我想问的是：嵌入式灯具如果做UL安规认证，需要做哪些测试？对应哪个标准？

owejudge 发表于 2011-9-15 10:32

引用第3楼xiaosu2659于2011-09-15 10:24发表的:
我想问的是：嵌入式灯具如果做UL安规认证，需要做哪些测试？对应哪个标准？

一楼已经说的很清楚了，UL1598，想知道做哪些测试，按照标准看就知道了。

Safer 发表于 2011-9-15 10:53

不是特别准确，仅仅供参考！
Temperature
Gasket accelerated aging
Conduit knockout and twistout
Dielectric Voltage Test
Mold-stress Relief Distortion Test
Bond impendence
Grounding Continuity Test
Impact Test(Ball Impact)
Lampholder mounting torque
Loading
Rain test
Snap-In or tab-mounted parts pull test with conduit
Sprinkler test
Strain relief test

往事如烟 发表于 2011-9-15 11:33

UL1598标准里有测试项目描述，如果已经在UL开案，可以要求UL提供一份datasheet，测试会更加详细。

jsspace 发表于 2011-9-15 14:08

以下是UL1598嵌入式灯具，有可能涉及到的测试;
END-PRODUCT ARC RESISTANCE:
POLYMERIC IMPACT:
BARRIER STRENGTH:
BENDING:
METAL THICKNESS EQUIVALENCY - CANTILEVER:
METAL THICKNESS EQUIVALENCY - COMPRESSION:
CONDUIT KNOCKOUT AND TWISTOUT:
DIELECTRIC VOLTAGE-WITHSTAND:
LUMINAIRES IN EXHAUST DUCTS OR ABOVE COOKING EQUIPMENT - ACCELERATED AGING:
LUMINAIRES IN EXHAUST DUCTS OR ABOVE COOKING EQUIPMENT - MECHANICAL ABUSE:
LUMINAIRES IN EXHAUST DUCTS OR ABOVE COOKING EQUIPMENT TEMPERATURE:
LUMINAIRES IN EXHAUST DUCTS OR ABOVE COOKING EQUIPMENT THERMAL SHOCK:
FIVE-INCH FLAME:
FLAMING OIL:
METAL THICKNESS EQUIVALENCY - FLEXING:
LUMINAIRE GASKET ASSEMBLY ACCELERATED AGING:
GASKET ACCELERATED AGING:
GASKET ADHESION:
GLASS SUPPORT ADHESIVE:
GLASS SUPPORTED BY FRICTION OR ADHESIVE:
GLOW-WIRE END PRODUCT:
BONDING CIRCUIT IMPEDANCE:
HORIZONTAL BURNING FLAME:
IMMERSION:
METAL THICKNESS EQUIVALENCY - IMPACT:
INTERLOCK SWITCH ENDURANCE:
HIGH-CURRENT ARC IGNITION (HAI):
LAMP CONTAINMENT BARRIER THERMAL SHOCK:
POLYMERIC LAMP CONTAINMENT BARRIER MELT-THROUGH TEST:
LAMPHOLDER LEAD PULL:
LAMPHOLDER MOUNTING BRACKET STOP:
LAMPHOLDER MOUNTING TORQUE:
LAMPHOLDER PULL:
LUMINAIRES IN EXHAUST DUCTS OR ABOVE COOKING EQUIPMENT - LARD/FAT AND OIL IMMERSION:
LOADING:
METALLIZED POLYMERIC PARTS COATING ADHESION:
MOLD STRESS RELIEF:
NEEDLE FLAME:
PAINT ADHESION:
AIR-HANDLING LUMINAIRES - PLASTIC MATERIAL FLAME:
TORQUE TEST:
POLYMERIC CONNECTOR LOADING:
POLYMERIC SUPPORT:
PULLOUT:
RAIN:
RIGIDITY TEST:
SELF-THREADING SCREW TORQUE TEST:
SUSPENDED-CEILING LUMINAIRES – SECURITY OF CLIPS:
SNAP-IN OR TAB-MOUNTED PARTS PULL TEST WITH CONDUIT:
SNAP-IN OR TAB-MOUNTED PARTS PULL TEST WITHOUT CONDUIT OPENING:
SPLICE INSPECTION:
SPRINKLER:
STRAIN RELIEF FOR CONDUCTORS:
STRAIN RELIEF FOR FLEXIBLE CORDS:
MOVABLE JOINT ROTATION:
MOVABLE JOINT TORSION AND PULL:
NORMAL TEMPERATURE, SURFACE:
NORMAL TEMPERATURE (RECESSED LUMINAIRE):
RECESSED ABNORMAL TEMPERATURE:
CHANGE OF RESISTANCE DATA:
TEMPERED GLASS IMPACT:
THERMAL CONDITIONING:
METAL THICKNESS EQUIVALENCY – TORQUE:
UV EXPOSURE CONDITIONING:
VERTICAL BURNING FLAME:
IMPACT CONDITIONING:
GROUND-SCREW ASSEMBLY STRENGTH:
CABLE PULL TEST:
ABNORMAL TEMPERATURE, SURFACE MOUNTED: FOR EDISON BASE FLUORESCENT LUMINAIRES EMPLOYING CFL LAMPS
ABNORMAL TEMPERATURE, RECESSED TYPE IC: FOR EDISON BASE FLUORESCENT LUMINAIRES EMPLOYING CFL LAMPS
ABNORMAL TEMPERATURE, RECESSED TYPE IC: FOR EDISON BASE FLUORESCENT LUMINAIRES EMPLOYING CFL LAMPS (OVERLAMPING)
UNRELIABLE COMPONENT ABNORMAL OPERATION TEST:
50 W POINT POWER ANALYSIS

xiaosu2659 发表于 2011-9-15 14:37

O(∩_∩)O谢谢

难得糊涂wrs 发表于 2011-9-16 11:13

页: [1] 2
查看完整版本: 嵌入式灯具