melon628 发表于 2011-8-18 11:15

GB 4943.1:201X最新信息,不知道是否是真的?大家發表下看法哈~

Bulletin Subject:   Publication and adoption of China GB 4943.1:201X (harmonized with IEC 60950-1: 2005)
                                          
Effective Date of Change: March 16, 2012
SUMMARY: The China GB 4943.1:201X (Chinese standard that is equivalent to IEC 60950-1, 2nd Edition with Chinese national differences) will become effective on March 16, 2012 for all products under the scope of IEC 60950-1:2005 that are applied with the CCC mark.

IMPACT: All CCC certifications will need to be updated by March 16, 2012.It is recommended that all submittals made after December 1, 2011 will be to this new standard.

Major changes: Following are the major Chinese national differences from IEC 60950-1 2nd Ed found in the China GB 4943.1 standard.

1). 1.4.5 - Tolerances on supply voltage: Tolerances are + 10% and - 10% instead of + 6% and - 10% as given in IEC60950-1. The China mains voltage is 220 V. Therefore, the test voltages under consideration are 198 to 242 V.

This will not have an impact if a product is marked with an input voltage range such as 200-240 V (servers are marked like this). This will have an impact a product is marked with a single input voltage such as 230 V or 115/230 V (desk top units are marked 115/230 V). In this case the heating test of 4.5 of IEC 60950-1 may need to be repeated at 198 V.

2). 1.7.1 - Marking of input rating: 220 V, 50 Hz for single phase; and 380 V, 50 Hz for 3-phase

This will not have an impact if a product is marked with an input voltage range such as 200-240 V. This will have an impact if a product is marked with a single input voltage such as 230 V or 115/230 V. The 220 V rating needs to be included in the marked rating.

3). 1.7 - Safety instructions: All safety instructions and the associated text in the manual for the required symbols on the equipment must be in 5 Chinese languages. The 5 Chinese languages are Simplified Chinese, Tibetan, Mongolian, Zhuang and Uyghur.

4). Altitude and clearances: For China, the clearances ( through air electrical spacings ) must be suitable for 5000 m. Dell currently designs equipment for 3048 m ( 10,000 feet ). Therefore, (unless clearances for 5000 m are used) the following symbol and instructions must be provided. All Dell equipment with CCC marking is impacted unless we redesign the equipment for 5000 m.

NOTE – For example, for 230 V equipment the clearance required for basic insulation is 2 mm. Dell requires this clearance to be 2.28 mm. For China and 5000 m 2.96 mm would be the require clearance distance.


Symbol for altitude ≤ 2000 m


Symbol on the product:

Chinese text in the instructions:

Only safe to use in areas under 2000 m above sea level

This instruction must be in 5 languages as given in item 3 above.

5). Equipment for China must be suitable for tropical climate:

According to 2.9.2, humidity conditioning for equipment considered suitable for tropical climate, humidity conditioning for equipment must be conducted at a temperature of 40°C ± 2°C, and humidity of 93% +2% /-3%. The humidity conditioning duration shall be 5 days (120h). The rated ambient temperature for such equipment must be 35° C.

Dell equipment is tested for 48 h. Therefore, either the test must be done for 120 h or the following symbol shall appear on the equipment and the instructions need to be provided in 5 official Chinese languages.

NOTE - If the above testing is not done, then the equipment is considered suitable for use in non-tropical climates.

Symbol on the product:



Chinese text in the instructions:

Only safe to use in non-tropical climate areas

These must be in 5 languages as given in item 3 above.

NOTE – China has not published its version of Amendment 1 to IEC 60950-1, 2nd edition but China will accept CB reports that cover amendment 1 to IEC 60950-1, 2nd edition.

Existing certificates:

All existing certificates must be updated to the GB4943.1 by March 16, 2012

阿bin 发表于 2011-8-18 12:35

Can you tell me where did you find above information? If you get this information from official website, that should be ture.

melon628 发表于 2011-8-18 13:04

這個是客戶給出來的,我在相關網站也沒找到這點,真不知道是怎樣?

ajay 发表于 2011-8-18 16:07

我在网站上也找不到。

abu013 发表于 2011-8-18 20:09

要通告也要用中文才对吧

ican8848 发表于 2011-8-18 21:12

WTO上公开而已
还没有正式发布呢

davidwang 发表于 2011-8-18 21:12

这个已经公布,如果外界没有意义,可能今年年底就会实行。

melon628 发表于 2011-8-18 22:15

这真实行的话,整的动静应该不会小!

hdf590 发表于 2011-8-22 20:55

应该是真的,前段时间听说过
页: [1]
查看完整版本: GB 4943.1:201X最新信息,不知道是否是真的?大家發表下看法哈~