kelvin2007 发表于 2010-12-10 09:03

在可換線BS插頭, 壓塊與線套一體結構應不附合安規.
因若用家自行更換新電線時卻沒有壓塊, 會有安全問題.

billma 发表于 2010-12-12 14:27

压线螺钉扭力要符合表3要求，还需要耐重复多次。

zy3618 发表于 2011-1-4 21:46

螺丝滑牙，螺丝扭力不合格，不符合标准。

bs1363 发表于 2011-1-5 14:52

This design is not acceptable according to BS 1363-1. It will fail the test of clause of 19.1. We need the cord grip to provide enough pressure to retain the flexible cord.

Besides, the plug is a rewirable type. If the the provided flexible cord was replaced with other cord by user, this is very dangerous since the bad contact of the terminals will be happened after pulling due to no cord grip.
页: 1 [2]
查看完整版本: bs插头压块螺丝