alexandershi 发表于 2010-9-8 11:20

自整流灯泡卖向美洲市场需不需要做认证？

请教大家一个问题，CCFL自整流灯泡卖向美洲市场需不需要做认证？
需要的话则要做哪些项目，按照什么标准做?
新收，请多指教，
多谢！

Liu 发表于 2010-9-8 11:41

UL1993 Self-Ballasted Lamps and Lamp Adapters

1 Scope
1.1 These requirements are intended to cover both self-ballasted lamps and self-ballasted lamp adapters
rated 120 to 347 V AC nominal for connection to screw-, pin-base, and recessed single contact (RSC or
R7) lampholders. These devices are intended for use in accordance with the National Electrical Code,
ANSI/NFPA 70, and the Canadian Electrical Code, Part I, in non-hazardous locations, and the
Instalaciones Eléctricas (utilización), NOM-001-SEDE.
1.2 These devices incorporate resistance, reactance, or electronic (solid-state) type ballasts or power
supplies. These devices employ various lamp technologies including, but not limited to, incandescent,
fluorescent, high-intensity discharge lamps, light-emitting diodes.
1.3 This standard does not apply to medium-to-medium base (E26) fittings that incorporate controls such
as photocells, motion detectors, radio controls, or dimmers covered by other standards.
1.4 These devices are not intended for use with emergency exit fixtures or emergency exit lights.

alexandershi 发表于 2010-9-8 12:57

多谢您的回复，
我看了下UL1993是Safety 方面的要求对吧，
请问EMC方面的要求是否也有，是哪个标准呢？
谢谢！

Liu 发表于 2010-9-8 13:07

引用第2楼alexandershi于2010-09-08 12:57发表的:
多谢您的回复，
我看了下UL1993是Safety 方面的要求对吧，
请问EMC方面的要求是否也有，是哪个标准呢？
谢谢！

美国没有EMC，类似的要看你的工作频率是否会落到FCC的范畴了。

alexandershi 发表于 2010-9-8 13:23

多谢您的回复，
灯的中心工作频率是50KHz，范围是45~60KHz。。
请指点，
谢谢！

kamleung 发表于 2010-9-8 16:41

Your product should be tested with FCC Rule Part 18 if your product will be sold in the US market. For the Canada market, your product should be tested with standard ICES 005.

By the way, please note that the lamp bulb will get energy efficiency requirment after after December 31, 2012 in Canada. All lamp bulbs should have the verification Mark.

no-little 发表于 2010-9-8 17:35

需要。

nbmao 发表于 2010-9-9 16:00

能源之星也要当心

alexandershi 发表于 2010-9-9 17:59

引用第5楼kamleung于2010-09-08 16:41发表的:
Your product should be tested with FCC Rule Part 18 if your product will be sold in the US market. For the Canada market, your product should be tested with standard ICES 005.

By the way, please note that the lamp bulb will get energy efficiency requirment after after December 31, 2012 in Canada. All lamp bulbs should have the verification Mark.

Thanks very much for your kindly /patient reply

songu 发表于 2010-9-13 13:57

可以不做。

因为不是强制认证。关键是你的客户能接受你的产品。

但做了认证，对产品的推广和销售会有很大的帮助。
页: [1] 2
查看完整版本: 自整流灯泡卖向美洲市场需不需要做认证？