sunsonw 发表于 2010-1-5 16:10

一般來說，正常使用的電器電壓通常會有百分之五的電源誤差…
230V的電器，一般來說可以用到255V（看設計者的設計）！
所以…大部份的220V的電器會標記220~240V！
因為電壓…會飄…

wwwabcd 发表于 2010-1-15 08:52

做测试按标准规定，产品标识要包括230和240V

lhmlhmlhm 发表于 2010-1-15 08:56

还是没明白是用哪种电压.

UL499 发表于 2010-1-15 09:24

给你们发个具有权威的网站发出的，希望能给我奖励哈

zhouxiao2519 发表于 2010-1-15 09:30

只知道电源线电压有250/250V

gdt102 发表于 2010-1-21 10:23

通用标准AS/NZS 3100明确规定，测试时用240V，如下：

In Australia, for equipment other than class III equipment, that is intended for
connection to the supply mains and that is not marked with an operating voltage of at
least 240 V for single phase equipment and at least 415 V for three-phase equipment,
for testing purposes the rating in amperes or loading in watts or volt-amperes is equal
to:
a) the rated value, for accessories where the rating has been determined for
operation at 240 V for single-phase equipment and 415 V for three-phase equipment,as appropriate.
b) the calculated value corresponding to 240 V for single-phase equipment and 415 V
for three-phase equipment, as appropriate, in all other cases.

杨柳风 发表于 2010-1-25 18:04

240V 50Hz, 我们做了很多产品了

gorden 发表于 2010-1-25 18:35

呵呵，不错，谢谢！

gary530 发表于 2010-4-28 14:19

230-240V 50Hz奥州通用

xiansai 发表于 2010-5-3 11:08

期待国标的出台。
页: 1 [2] 3
查看完整版本: 澳洲的电压究竟是230还是240？