tanger 发表于 2009-10-13 14:30

关于出口美国产品中的球形末端

如果将槌棒中的球形末端直径改为15mm以下就会安全。
CPSC, Dolgencorp Inc. Announce Recall of Toy Xylophones Sold at Dollar General Stores
WASHINGTON, D.C. - In cooperation with the U.S. Consumer Product Safety Commission (CPSC), Dolgencorp Inc., of Goodlettsville, Tenn., is voluntarily recalling about 113,000 toy xylophones. The red mallet sold with the toy xylophone can get lodged in the throats of young children, posing a choking hazard.

CPSC and Dolgencorp Inc. are not aware of any injuries involving these toy xylophones. This recall is being conducted to prevent the possibility of injury.

The toy xylophone is white, rectangular-shaped with a green handle and multi-colored bars including, red, yellow, green and blue. A yellow button shaped like the face of a cat is on the front of the xylophone. The mallet sold with the xylophone is red with two round balls at either end of the mallet. Writing on the box reads, "BABY TOYS XYLOPHONE, TO HELP BABY LEARN AND DEVELOP, and MADE IN CHINA."

Dollar General stores nationwide sold these toy xylophones from July 1998 through October 2000 for $3.

Consumers should immediately take this toy away from children and return it to their local Dollar General store for a full refund. For more information, call Dollar General at (800) 678-9258 between 8 a.m. and 5 p.m. CT Monday through Friday.

xilin 发表于 2009-10-13 15:21

应该改大吧?改小了一样可以存放到口中
只有改大 改大到不能进嘴??

xilin 发表于 2009-10-13 15:22

奇怪,难到感觉到窒息不会不知道拿出来呀

tanger 发表于 2009-10-13 15:23

4.32.2.1 Exclusions—The requirements of 4.32.2 do not
apply to the following nail, screw, and bolt shapes:
(1) Soft-filled shapes and fabric shapes.
(2) Shapes with an overall length less than 2.25 in. (57.1
mm).
(3) Shapes whose spherical or hemispherical ends are less
than 0.6 in. (15 mm) in diameter, as shown in Fig. 18.
这里不是提到了15mm也可以豁免吗?

hewei 发表于 2009-10-13 17:07

引用第2楼xilin于2009-10-13 15:22发表的:
奇怪,难到感觉到窒息不会不知道拿出来呀
有些东西吃的下,不一定拿得出啊!如果在你嘴放个灯泡,你猜拿不拿的出啊
毕竟最大也只有18个月大的孩子啊,

tanger 发表于 2009-10-13 17:14

hewei 对此什么看法啊?改成15mm以下是否可行?

hewei 发表于 2009-10-13 17:23

好象这个条款只适合18-48个月儿童玩具钉,螺丝,螺栓,并且一个部件就是一个整体,
你这个应该是两个胶件组装的吧

hewei 发表于 2009-10-13 17:53

刚掉线了,
我个人觉得此产品不适合条款4.32.2.1

tassx 发表于 2009-10-13 20:09

我也觉得不适用于4.32.2

jason_steel 发表于 2009-10-14 09:32

这个产品应该不是fail 4.32.2,而是fail4.32.1
页: [1] 2
查看完整版本: 关于出口美国产品中的球形末端