ASTM F963警告語問題？
請問，請5.11.3上要求，標識說明需要以主要的展示面的計算面積為基礎而定的字體尺寸要求，那主要的展示面是指玩具的整個包裝的面積呢？？還是指標識的主要展示面積，也就是警告語那個框框呢？？謝謝 主要展示面指的是标识的显示面，就是你指的所谓的警告语的框框！ 好象不對，我前面看了下16 cfr 1500 121(c)1 裡說主要展示面指的是整個表面(c) Conspicuousness--type size and style. To satisfy the requirement
that cautionary labeling statements under the Act be conspicuous and
legible, such statements shall conform to the following requirements:
(1) Area of principal display panel. The area of the principal
display panel is the area of the side or surface of the immediate
container, or of the side or surface of any outer container or wrapping,
that bears the labeling designed to be most prominently displayed,
shown, presented, or examined under conditions of retail sale. This area
is not limited to the portion of the surface covered with labeling;
rather, it includes the entire surface. Flanges at the tops and bottoms
of cans, conical shoulders of cans, handles, and shoulders and necks of
bottles and jars are excluded in measuring the area. For the purposes of
determining the proper type size for cautionary labeling, the area of
the principal display panel (or other panel bearing cautionary labeling,
under paragraph (c)(2)(ii) of this section) is to be computed as
follows:
(i) In the case of a rectangular package, where one entire side is
the principal display panel, the product of the height times the width
of that side shall be the area of the principal display panel.
(ii) In the case of a cylindrical or nearly cylindrical container or
tube on which the principal display panel appears on the side, the area
of the principal display panel shall be 40 percent of the product of the
height of the container times its circumference.
(iii) In the case of any other shape of container, the area of the
principal display panel shall be 40 percent of the total surface of the
container, excluding those areas, such as flanges at tops and bottoms,
specified in paragraph (c)(1) above. However, if such a container
presents an obvious principal display panel (such as an oval or hour-
glass shaped area on the side of a container for dishwashing detergent),
the area to be measured shall be the entire area of the obvious
principal display panel. 主要展示面
principal display panel
玩具展示给顾客的那个表面的面积。 謝謝，看了1500後，我想應該也是這樣。。。。。 不是那个框框面积，而是你一般摆放在销售橱窗上时，顾客一眼就看到那个平面的面积。虽然有点主观，但从包装的设计不难看出该怎样摆，有时不止一个主要展示面的。
字体大小有要求，是为了避免警告语不突出、明显、醒目，以及因字体太小而令人难以阅读甚至忽略。但个人觉得，美国标准的字体要求是不是有点过头了，连中间那个空位都有要求 不好意思銷美玩具除了要符合ASTM f963 外也要符合CFR1500的標示嗎? 是的，astm f963裡第5章不是講的很清楚嗎？ 学习了，谢谢。 主要展示面就是这个产品所要向客人展示的那个面。
页:
[1]
