请问UL2517 22AWG的规格是什么
请问UL2517 22AWG的规格是什么 有没有这个标准UL2517啊？高手指教一下！ 是UL 758 AWM內STYLE嗎 是的，请指点 內部結構可能還是要根據需要了.UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subj. 758 Section 2 Page 2517 Issued:1970-10-21
Revised:2004-01-30
Style 2517 Thermoplastic (PVC) Jacketed Cord.
______________________________________________________________________________
Rating 105°C, 300 Volts.
______________________________________________________________________________
Insulated No. 40 AWG minimum.Labeled or complying with
Conductors Manufacturer’s AWM Procedure having a minimum rating of
105°C, 300 Volts.
______________________________________________________________________________
Assembly Consists of two or more singles, twisted pairs or groups
of twisted singles twisted together.The singles or
groups of singles may be laid parallel forming a flat,
oval or round cable.The lay of the conductors are not
specified.A barrier layer and/or fillers are optional.
Manufacturer shall maintain a complete description of each
assembly.May use same or mixed AWG size.
______________________________________________________________________________
Covering Optional.
______________________________________________________________________________
Shield Optional.
______________________________________________________________________________
Jacket Thickness of Thermoplastic PVC Jacket
#Dia. of Cable Avg. Thickness Min Thickness
under Jacket in mils at any point
in inches Minimum in mils _
0.700 or less 30 24
0.701 - 1.000 60 48
1.001 - 1.501 80 64
# - Major diameter if cable is flat or oval.
______________________________________________________________________________
Braid Optional.
______________________________________________________________________________
Standard Appliance Wiring Material UL 758.
______________________________________________________________________________
(Continued on Page 2517A)
UNDERWRITERS LABORATORIES INC. APPLIANCE WIRING MATERIAL
Subj. 758 Section 2 Page 2517A Issued:1970-10-21
Revised:2004-01-30
Instructions Detailed Examination of the Cable Assembly and Jacket Wall.
to UL Tensile Strength and Elongation of Jacket, Class 43.
Representative Dielectric Strength Test, 1500 V (Shielded Cable only).
The designation of all Styles of the individual conductors used making up the cable assembly shall be available, and the UL Representative's tag shall indicate if the Style is labeled or not.If they are not labeled, the appropriate Follow-Up Tests shall be conducted.
______________________________________________________________________________
UL (4)Detailed Examination.
Counter-Check (4)Tensile Strength and Elongation of Jacket, Class 43.
Program (4)Heat Shock on Jacket.
(4)Deformation on Jacket, Class 43.
(4)Cold Bend on Completed Cable.
* (12) Cable Flame Test on Completed Cable.
If the insulated Styles are not labeled, the appropriate
Follow-Up Tests shall be conducted.
______________________________________________________________________________
Marking General.
______________________________________________________________________________
Use External interconnection of electronic equipment or internal
wiring of electronic equipment or appliances.Tags may also
indicate the following: "600 Volts peak for Electronic Use
Only". 在那可以找到这些数据？ 引用第5楼wangjb于2010-01-19 08:19发表的:
在那可以找到这些数据？
UL官方网站哟 4楼贴的style page是标准型的要求，不同的工厂还可以有所变化，一般在细则的facing page会有具体的描述。
查找的方法可以通过 WWW.UL.COM- IQ DATA进入，简单的方法是通过Certification，设置搜索条件 CCN:AVLV2 + key word 2517搜索，随便找到一家厂点击 2571进入即可。
需要提醒的是UL针对所有style page都在08，09年revise过了，所以4楼提供的style page是旧的。下面的才是新的：
http://data.ul.com/link/stylepage.aspx?style=2517
页:
[1]
