EMC指令2004/108/EC最新协调标准一览表
Summary list of titles and references of harmonised standards relating to EMCThis list replaces all the previous lists published in the Official Journal of the European Union. The Commission ensures the updating of this list.
However, this list does not have any legal validity; only publication in the Official Journal produces legal affect.
European Standardisation OrganisationReference and title of the standard
(and reference document)
Reference of the superseded standard
Date of cessation of presumption of conformity of the superseded standard
CENELEC EN 50065-1:2001
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 1: General requirements, frequency bands and electromagnetic disturbances
EN 50065-1:1991
+ A1:1992
+ A2:1995
+ A3:1996
Note 2.1
Date expired
(01.04.2003) CENELEC EN 50065-2-1:2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-1: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in residential, commercial and light industrial environments
Relevant generic standard(s)
Note 2.3
Date expired
(01.10.2004) Amendment A1:2005 to EN 50065-2-1:2003
Note 3
01.07.2008 CENELEC EN 50065-2-2:2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-2: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 95 kHz to 148,5 kHz and intended for use in industrial environments
Relevant generic standard(s)
Note 2.3
Date expired
(01.10.2004) Amendment A1:2005 to EN 50065-2-2:2003
Note 3
01.07.2008 CENELEC EN 50065-2-3:2003
Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz - Part 2-3: Immunity requirements for mains communications equipment and systems operating in the range of frequencies 3 kHz to 95 kHz and intended for use by electricity suppliers and distributors
Relevant generic standard(s)
Note 2.3
Date expired
(01.08.2004) Amendment A1:2005 to EN 50065-2-3:2003
Note 3
01.07.2008 CENELEC EN 50083-2:2001
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
EN 50083-2:1995
+ A1:1997
Note 2.1
Date expired
(01.01.2004) Amendment A1:2005 to EN 50083-2:2001
Note 3
01.04.2008 CENELEC EN 50083-2:2006
Cable networks for television signals, sound signals and interactive services - Part 2: Electromagnetic compatibility for equipment
EN 50083-2:2001
and its amendment
Note 2.1
01.04.2009 CENELEC EN 50090-2-2:1996
Home and Building Electronic Systems (HBES) - Part 2-2: System overview - General technical requirements
Relevant generic standard(s)
Note 2.3
Date expired
(01.10.1999) CENELEC EN 50091-2:1995
Uninterruptible power systems (UPS) - Part 2: EMC requirements
Relevant generic standard(s)
Note 2.3
Date expired
(01.03.1999) CENELEC EN 50121-1:2006
Railway applications - Electromagnetic compatibility - Part 1: General
Relevant generic standard(s)
Note 2.3
01.07.2009 CENELEC EN 50121-2:2006
Railway applications - Electromagnetic compatibility - Part 2: Emission of the whole railway system to the outside world
Relevant generic standard(s)
Note 2.3
01.07.2009 CENELEC EN 50121-3-1:2006
Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
Relevant generic standard(s)
Note 2.3
01.07.2009 CENELEC EN 50121-3-2:2006
Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
Relevant generic standard(s)
Note 2.3
01.07.2009 CENELEC EN 50121-4:2006
Railway applications - Electromagnetic compatibility - Part 4: Emission and immunity of the signalling and telecommunications apparatus
Relevant generic standard(s)
Note 2.3
01.07.2009 CENELEC EN 50121-5:2006
Railway applications - Electromagnetic compatibility - Part 5: Emission and immunity of fixed power supply installations and apparatus
Relevant generic standard(s)
Note 2.3
01.07.2009 CENELEC EN 50130-4:1995
Alarm systems - Part 4: Electromagnetic compatibility - Product family standard: Immunity requirements for components of fire, intruder and social alarm systems
Relevant generic standard(s)
Note 2.3
Date expired
(01.01.2001) Amendment A1:1998 to EN 50130-4:1995
Note 3
Date expired
(01.01.2001) Amendment A2:2003 to EN 50130-4:1995
Note 3
01.09.2007 CENELEC EN 50148:1995
Electronic taximeters
Relevant generic standard(s)
Note 2.3
Date expired
(15.12.1995) CENELEC EN 50240:2004
Electromagnetic compatibility (EMC) - Product standard for resistance welding equipment
Relevant generic standard(s)
Note 2.3
Date expired
(01.04.2007) CENELEC EN 50263:1999
Electromagnetic compatibility (EMC) - Product standard for measuring relays and protection equipment
Relevant generic standard(s)
Note 2.3
Date expired
(01.08.2002) CENELEC EN 50270:1999
Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen
Relevant generic standard(s)
Note 2.3
Date expired
(01.10.2001) CENELEC EN 50293:2000
Electromagnetic compatibility - Road traffic signal systems - Product standard
Relevant generic standard(s)
Note 2.3
Date expired
(01.04.2003) CENELEC EN 50295:1999
Low-voltage switchgear and controlgear - Controller and device interface systems - Actuator Sensor interface (AS-i)
Relevant generic standard(s)
Note 2.3
Date expired
(01.12.1999) CENELEC EN 50370-1:2005
Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 1: Emission
Relevant generic standard(s)
Note 2.3
01.02.2008 CENELEC EN 50370-2:2003
Electromagnetic compatibility (EMC) - Product family standard for machine tools - Part 2: Immunity
Relevant generic standard(s)
Note 2.3
Date expired
(01.11.2005) CENELEC EN 50412-2-1:2005
Power line communication apparatus and systems used in low-voltage installations in the frequency range 1,6 MHz to 30 MHz - Part 2-1: Residential, commercial and industrial environment - Immunity requirements
Relevant generic standard(s)
Note 2.3
01.04.2008 CENELEC EN 50428:2005
Switches for household and similar fixed electrical installations - Collateral standard - Switches and related accessories for use in home and building electronic systems (HBES)
Relevant generic standard(s)
Note 2.3
01.01.2008 CENELEC EN 50470-1:2006
Electricity metering equipment (a.c.) - Part 1: General requirements, tests and test conditions - Metering equipment (class indexes A, B and C)
Relevant generic standard(s)
Note 2.3
01.05.2009 CENELEC EN 55011:1998
Industrial, scientific and medical (ISM) radio-frequency equipment - Radio disturbance characteristics - Limits and methods of measurement
(CISPR 11:1997 (Modified))
EN 55011:1991
+ A1:1997
+ A2:1996
Note 2.1
Date expired
(01.01.2001) Amendment A1:1999 to EN 55011:1998
(CISPR 11:1997/A1:1999) Note 3
Date expired
(01.08.2002) Amendment A2:2002 to EN 55011:1998
(CISPR 11:1999/A2:2002) Note 3
Date expired
(01.10.2005) CENELEC EN 55011:2007
Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
(CISPR 11:2003 (Modified)
+ A1:2004 (Modified))
EN 55011:1998
and its amendments
Note 2.1
01.11.2009 Amendment A2:2007 to EN 55011:2007
(CISPR 11:2003/A2:2006) Note 3
01.11.2009 CENELEC EN 55012:2002
Vehicles, boats and internal combustion engine driven devices - Radio disturbance characteristics - Limits and methods of measurement for the protection of receivers except those installed in the vehicle/boat/device itself or in adjacent vehicles/boats/devices
(CISPR 12:2001)
Note 8
Relevant generic standard(s)
Note 2.3
Date expired
(01.02.2005) Amendment A1:2005 to EN 55012:2002
(CISPR 12:2001/A1:2005) Note 3
01.03.2008 CENELEC EN 55013:2001
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement
(CISPR 13:2001 (Modified))
EN 55013:1990
+ A12:1994
+ A13:1996
+ A14:1999
Note 2.1
Date expired
(01.09.2004) Amendment A1:2003 to EN 55013:2001
(CISPR 13:2001/A1:2003) Note 3
Date expired
(01.04.2006) Amendment A2:2006 to EN 55013:2001
(CISPR 13:2001/A2:2006) Note 3
01.03.2009 CENELEC EN 55014-1:2000
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
(CISPR 14-1:2000)
EN 55014-1:1993
+ A1:1997
+ A2:1999
Note 2.1
Date expired
(01.08.2003) Amendment A1:2001 to EN 55014-1:2000
(CISPR 14-1:2000/A1:2001) Note 3
Date expired
(01.10.2004) Amendment A2:2002 to EN 55014-1:2000
(CISPR 14-1:2000/A2:2002) Note 3
Date expired
(01.10.2005) CENELEC EN 55014-1:2006
Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission
(CISPR 14-1:2005)
EN 55014-1:2000
and its amendments
Note 2.1
01.09.2009 CENELEC EN 55014-2:1997 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard
(CISPR 14-2:1997)
EN 55104:1995
Note 2.1
Date expired
(01.01.2001) Amendment A1:2001 to EN 55014-2:1997
(CISPR 14-2:1997/A1:2001) Note 3
Date expired
(01.12.2004) CENELEC EN 55015:2000
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(CISPR 15:2000)
EN 55015:1996
+ A1:1997
+ A2:1999
Note 2.1
Date expired
(01.08.2003) Amendment A1:2001 to EN 55015:2000
(CISPR 15:2000/A1:2001) Note 3
Date expired
(01.12.2004) Amendment A2:2002 to EN 55015:2000
(CISPR 15:2000/A2:2002) Note 3
Date expired
(01.10.2005) CENELEC EN 55015:2006
Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment
(CISPR 15:2005)
EN 55015:2000
and its amendments
Note 2.1
01.09.2009 CENELEC EN 55020:2002
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement
(CISPR 20:2002)
EN 55020:1994
+ A11:1996
+ A12:1999
+ A13:1999
+ A14:1999
Note 2.1
Date expired
(01.12.2006) Amendment A1:2003 to EN 55020:2002
(CISPR 20:2002/A1:2002) Note 3
Date expired
(01.12.2006) Amendment A2:2005 to EN 55020:2002
(CISPR 20:2002/A2:2004) Note 3
01.02.2008 CENELEC EN 55020:2007
Sound and television broadcast receivers and associated equipment - Immunity characteristics - Limits and methods of measurement
(CISPR 20:2006)
EN 55020:2002
and its amendments
Note 2.1
01.12.2009 CENELEC EN 55022:1998
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
(CISPR 22:1997 (Modified))
EN 55022:1994
+ A1:1995
+ A2:1997
Note 2.1
Date expired
(01.08.2007) Amendment A1:2000 to EN 55022:1998
(CISPR 22:1997/A1:2000) Note 3
01.10.2009 Amendment A2:2003 to EN 55022:1998
(CISPR 22:1997/A2:2002) Note 3
01.10.2009 CENELEC EN 55022:2006
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement
(CISPR 22:2005 (Modified))
EN 55022:1998
and its amendments
Note 2.1
01.10.2009 CENELEC EN 55024:1998
Information technology equipment - Immunity characteristics - Limits and methods of measurement
(CISPR 24:1997 (Modified))
Relevant generic standard(s)
Note 2.3
Date expired
(01.07.2001) Amendment A1:2001 to EN 55024:1998
(CISPR 24:1997/A1:2001) Note 3
Date expired
(01.10.2004) Amendment A2:2003 to EN 55024:1998
(CISPR 24:1997/A2:2002) Note 3
Date expired
(01.12.2005) CENELEC EN 55103-1:1996
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 1: Emission
Relevant generic standard(s)
Note 2.3
Date expired
(01.09.1999) CENELEC EN 55103-2:1996
Electromagnetic compatibility - Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use - Part 2: Immunity
Relevant generic standard(s)
Note 2.3
Date expired
(01.09.1999) CENELEC EN 60204-31:1998
Safety of machinery - Electrical equipment of machines - Part 31: Particular safety and EMC requirements for sewing machines, units and systems
(IEC 60204-31:1996 (Modified))
Relevant generic standard(s)
Note 2.3
Date expired
(01.06.2002) CENELEC EN 60439-1:1999
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies
(IEC 60439-1:1999)
EN 60439-1:1994
+ A11:1996
Note 2.1
Date expired
(01.08.2002) CENELEC EN 60669-2-1:2000
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
(IEC 60669-2-1:1996 (Modified)
+ A1:1997 (Modified))
EN 60669-2-1:1996
+ A11:1997
Note 2.1
Date expired
(01.10.2005) Amendment A2:2001 to EN 60669-2-1:2000
(IEC 60669-2-1:1996/A2:1999 (Modified)) Note 3
Date expired
(01.10.2005) CENELEC EN 60669-2-1:2004
Switches for household and similar fixed electrical installations - Part 2-1: Particular requirements - Electronic switches
(IEC 60669-2-1:2002 (Modified))
EN 60669-2-1:2000
and its amendment
Note 2.1
01.07.2009 CENELEC EN 60669-2-2:1997
Switches for household and similar fixed electrical installations - Part 2: Particular requirements - Section 2: Electromagnetic remote-control switches (RCS)
(IEC 60669-2-2:1996)
Relevant generic standard(s)
Note 2.3
Date expired
(01.06.1999) CENELEC EN 60669-2-3:1997
Switches for household and similar fixed electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS)
(IEC 60669-2-3:1997)
EN 60669-2-3:1996
Note 2.1
Date expired
(01.06.1999) CENELEC EN 60730-1:1995
Automatic electrical controls for household and similar use - Part 1: General requirements
(IEC 60730-1:1993 (Modified))
-
- Amendment A11:1996 to EN 60730-1:1995
Relevant generic standard(s)
Note 2.3
Date expired
(01.01.1998) Amendment A17:2000 to EN 60730-1:1995
Note 3
Date expired
(01.10.2002) CENELEC EN 60730-1:2000
Automatic electrical controls for household and similar use - Part 1: General requirements
(IEC 60730-1:1999 (Modified))
Note 7
EN 60730-1:1995
and its amendments
- Amendment A1:2004 to EN 60730-1:2000
(IEC 60730-1:1999/A1:2003 (Modified)) Note 3
- CENELEC EN 60730-2-5:1995
Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical burner control systems
(IEC 60730-2-5:1993 (Modified))
EN 60730-1:1995
and its amendments
Note 2.3
Date expired
(15.12.2000) CENELEC EN 60730-2-5:2002
Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems
(IEC 60730-2-5:2000 (Modified))
-
- Amendment A1:2004 to EN 60730-2-5:2002
(IEC 60730-2-5:2000/A1:2004 (Modified)) EN 60730-2-5:1995
Note 2.1
01.12.2008 Amendment A11:2005 to EN 60730-2-5:2002
Note 3
01.12.2008 CENELEC EN 60730-2-6:1995
Automatic electrical controls for household and similar use - Part 2: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements
(IEC 60730-2-6:1991 (Modified))
-
- Amendment A1:1997 to EN 60730-2-6:1995
(IEC 60730-2-6:1991/A1:1994 (Modified)) EN 60730-1:1995
and its amendments
Note 2.3
Date expired
(15.12.2003) CENELEC EN 60730-2-7:1991
Automatic electrical controls for household and similar use - Part 2: Particular requirements for timers and time switches
(IEC 60730-2-7:1990 (Modified))
-
- Amendment A1:1997 to EN 60730-2-7:1991 (IEC 60730-2-7:1990/A1:1994 (Modified)) EN 60730-1:1995
and its amendments
Note 2.3
Date expired
(01.01.2004) CENELEC EN 60730-2-8:1995
Automatic electrical controls for household and similar use - Part 2: Particular requirements for electrically operated water valves, including mechanical requirements
(IEC 60730-2-8:1992 (Modified))
-
- Amendment A1:1997 to EN 60730-2-8:1995
(IEC 60730-2-8:1992/A1:1994 (Modified)) EN 60730-1:1995
and its amendments
Note 2.3
Date expired
(01.01.2004) > Amendment A2:1997 to EN 60730-2-8:1995
(IEC 60730-2-8:1992/A2:1997) Note 3
Date expired
(01.01.2004) CENELEC EN 60730-2-8:2002
Automatic electrical controls for household and similar use - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements
(IEC 60730-2-8:2000 (Modified))
EN 60730-2-8:1995
and its amendments
Note 2.1
01.12.2008 Amendment A1:2003 to EN 60730-2-8:2002
(IEC 60730-2-8:2000/A1:2002 (Modified)) Note 3
01.12.2008 CENELEC EN 60730-2-9:1995
Automatic electrical controls for household and similar use - Part 2: Particular requirements for temperature sensing controls
(IEC 60730-2-9:1992 (Modified))
-
- Amendment A1:1996 to EN 60730-2-9:1995
(IEC 60730-2-9:1992/A1:1994 (Modified)) EN 60730-1:1995
and its amendments
Note 2.3
Date expired
(01.01.2004) Amendment A2:1997 to EN 60730-2-9:1995
(IEC 60730-2-9:1992/A2:1994 (Modified)) Note 3
Date expired
(01.01.2004) CENELEC EN 60730-2-9:2002
Automatic electrical controls for household and similar use - Part 2-9: Particular requirements for temperature sensing controls
(IEC 60730-2-9:2000 (Modified))
EN 60730-2-9:1995
and its amendments
Note 2.1
01.12.2008 Amendment A2:2005 to EN 60730-2-9:2002
(IEC 60730-2-9:2000/A2:2004 (Modified)) Note 3
01.12.2007 Amendment A1:2003 to EN 60730-2-9:2002
(IEC 60730-2-9:2000/A1:2002 (Modified)) Note 3
01.12.2008 CENELEC EN 60730-2-11:1993
Automatic electrical controls for household and similar use - Part 2-11: Particular requirements for energy regulators
(IEC 60730-2-11:1993)
-
- Amendment A1:1997 to EN 60730-2-11:1993
(IEC 60730-2-11:1993/A1:1994 (Modified)) EN 60730-1:1995
and its amendments
Note 2.3
Date expired
(01.07.2000) Amendment A11:2005 to EN 60730-2-11:1993
Note 3
01.03.2009 CENELEC EN 60730-2-13:1998
Automatic electrical controls for household and similar use - Part 2-13: Particular requirements for humidity sensing controls
(IEC 60730-2-13:1995 (Modified))
EN 60730-1:1995
and its amendments
Note 2.3
Date expired
(01.08.2001) Amendment A11:2005 to EN 60730-2-13:1998
Note 3
01.02.2009 CENELEC EN 60730-2-14:1997
Automatic electrical controls for household and similar use - Part 2-14: Particular requirements for electric actuators
(IEC 60730-2-14:1995 (Modified))
EN 60730-1:1995
and its amendments
Note 2.3
Date expired
(01.06.2004) Amendment A1:2001 to EN 60730-2-14:1997
(IEC 60730-2-14:1995/A1:2001) Note 3
01.07.2008 CENELEC EN 60730-2-18:1999
Automatic electrical controls for household and similar use - Part 2-18: Particular requirements for automatic electrical water and air flow sensing controls, including mechanical requirements
(IEC 60730-2-18:1997 (Modified))
EN 60730-1:1995
and its amendments
Note 2.3
Date expired
(01.04.2002) CENELEC EN 60870-2-1:1996
Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility
(IEC 60870-2-1:1995)
Relevant generic standard(s)
Note 2.3
Date expired
(01.09.1996) CENELEC EN 60945:2002
Maritime navigation and radiocommunication equipment and systems - General requirements - Methods of testing and required test results
(IEC 60945:2002)
EN 60945:1997
Note 2.1
Date expired
(01.10.2005) CENELEC EN 60947-1:2004
Low-voltage switchgear and controlgear - Part 1: General rules
(IEC 60947-1:2004)
Note 6
EN 60947-1:1999
+ A2:2001
Note 2.1
Date expired
(01.04.2007) CENELEC EN 60947-2:2003
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
(IEC 60947-2:2003)
EN 60947-2:1996
+ A1:1997
+ A2:2001
Note 2.1
Date expired
(01.06.2006) CENELEC EN 60947-2:2006
Low-voltage switchgear and controlgear - Part 2: Circuit-breakers
(IEC 60947-2:2006)
EN 60947-2:2003
01.07.2009 CENELEC EN 60947-3:1999
Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units
(IEC 60947-3:1999)
EN 60947-3:1992
+ A1:1995
Note 2.1
Date expired
(01.01.2002) Amendment A1:2001 to EN 60947-3:1999
(IEC 60947-3:1999/A1:2001) Note 3
Date expired
(01.03.2004) CENELEC EN 60947-4-1:2001
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
(IEC 60947-4-1:2000)
-
- Amendment A1:2002 to EN 60947-4-1:2001
(IEC 60947-4-1:2000/A1:2002) EN 60947-4-1
and its amendments
Note 2.1
Date expired
(01.10.2005) Amendment A2:2005 to EN 60947-4-1:2001
(IEC 60947-4-1:2000/A2:2005) Note 3
01.07.2008 CENELEC EN 60947-4-2:2000
Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters
(IEC 60947-4-2:1999)
EN 60947-4-2:1996
+ A2:1998
Note 2.1
Date expired
(01.12.2002) Amendment A1:2002 to EN 60947-4-2:2000
(IEC 60947-4-2:1999/A1:2001) Note 3
Date expired
(01.03.2005) Amendment A2:2006 to EN 60947-4-2:2000
(IEC 60947-4-2:1999/A2:2006) Note 3
01.12.2009 CENELEC EN 60947-4-3:2000
Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads
(IEC 60947-4-3:1999)
Relevant generic standard(s)
Note 2.3
Date expired
(01.12.2002) Amendment A1:2006 to EN 60947-4-3:2000
(IEC 60947-4-3:1999/A1:2006) Note 3
01.11.2009 CENELEC EN 60947-5-1:2004
Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices
(IEC 60947-5-1:2003)
EN 60947-5-1:1997
+ A12:1999
Note 2.1
Date expired
(01.05.2007) CENELEC EN 60947-5-2:1998
Low-voltage switchgear and controlgear - Part 5-2: Control circuit devices and switching elements - Proximity switches
(IEC 60947-5-2:1997 (Modified))
EN 60947-5-2:1997
Note 2.1
Date expired
(01.10.2001) Amendment A2:2004 to EN 60947-5-2:1998
(IEC 60947-5-2:1997/A2:2003) Note 3
Date expired
(01.02.2007) CENELEC EN 60947-5-3:1999
Low-voltage switchgear and controlgear - Part 5-3: Control circuit devices and switching elements - Requirements for proximity devices with defined behaviour under fault conditions (PDF)
(IEC 60947-5-3:1999)
Relevant generic standard(s)
Note 2.3
Date expired
(01.05.2002) Amendment A1:2005 to EN 60947-5-3:1999
(IEC 60947-5-3:1999/A1:2005) Note 3
01.03.2008 CENELEC EN 60947-5-6:2000
Low-voltage switchgear and controlgear - Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)
(IEC 60947-5-6:1999)
EN 50227:1997
Note 2.1
Date expired
(01.01.2003) CENELEC EN 60947-5-7:2003
Low-voltage switchgear and controlgear - Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output
(IEC 60947-5-7:2003)
Relevant generic standard(s)
Note 2.3
Date expired
(01.09.2006) CENELEC EN 60947-6-1:1991
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Automatic transfer switching equipment
(IEC 60947-6-1:1989)
Relevant generic standard(s)
Note 2.3
Date expired
(01.10.1997) Amendment A2:1997 to EN 60947-6-1:1991
(IEC 60947-6-1:1989/A2:1997) EN 60947-6-1:1991/A11:1997
Note 3
Date expired
(01.07.1998) CENELEC EN 60947-6-1:2005
Low-voltage switchgear and controlgear - Part 6-1: Multiple function equipment - Transfer switching equipment
(IEC 60947-6-1:2005)
EN 60947-6-1:1991
and its amendments
Note 2.1
01.10.2008 CENELEC EN 60947-6-2:2003
Low-voltage switchgear and controlgear - Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)
(IEC 60947-6-2:2002)
EN 60947-6-2:1993
+ A1:1997
Note 2.1
Date expired
(01.09.2005) CENELEC EN 60947-8:2003
Low-voltage switchgear and controlgear - Part 8: Control units for built-in thermal protection (PTC) for rotating electrical machines
(IEC 60947-8:2003)
Relevant generic standard(s)
Note 2.3
Date expired
(01.07.2006) Amendment A1:2006 to EN 60947-8:2003
(IEC 60947-8:2003/A1:2006) Note 3
01.10.2009 CENELEC EN 60974-10:2003
Arc welding equipment - Part 10: Electromagnetic compatibility (EMC) requirements
(IEC 60974-10:2002 (Modified))
EN 50199:1995
Note 2.1
Date expired
(01.03.2006) CENELEC EN 61000-3-2:2000
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current up to and including 16 A per phase)
(IEC 61000-3-2:2000 (Modified))
EN 61000-3-2:1995
+ A1:1998
+ A2:1998
+ A14:2000
Note 2.1
Date expired
(01.01.2004) Amendment A2:2005 to EN 61000-3-2:2000
(IEC 61000-3-2:2000/A1:2001
+ IEC 61000-3-2:2000/A2:2004) Note 3
01.01.2008 CENELEC EN 61000-3-2:2006
Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic current emissions (equipment input current <= 16 A per phase)
(IEC 61000-3-2:2005)
EN 61000-3-2:2000
and its amendment
Note 2.1
01.02.2009 CENELEC EN 61000-3-3:1995
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems, for equipment with rated current <= 16 A per phase and not subject to conditional connection
(IEC 61000-3-3:1994)
EN 60555-3:1987
+ A1:1991
Note 2.2
Date expired
(01.01.2001) Amendment A1:2001 to EN 61000-3-3:1995
(IEC 61000-3-3:1994/A1:2001) Note 3
Date expired
(01.05.2004) Amendment A2:2005 to EN 61000-3-3:1995
(IEC 61000-3-3:1994/A2:2005) Note 3
01.09.2008 CENELEC EN 61000-3-11:2000
Electromagnetic compatibility (EMC) - Part 3-11: Limits - Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems - Equipment with rated current <= 75 A and subject to conditional connection
(IEC 61000-3-11:2000)
Relevant generic standard(s)
Note 2.3
Date expired
(01.11.2003) CENELEC EN 61000-3-12:2005
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current > 16 A and <= 75 A per phase
(IEC 61000-3-12:2004)
Relevant generic standard(s)
Note 2.3
01.02.2008 CENELEC EN 61000-6-1:2001
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
(IEC 61000-6-1:1997 (Modified))
EN 50082-1:1997
Note 2.1
Date expired
(01.07.2004) CENELEC EN 61000-6-1:2007
Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for residential, commercial and light-industrial environments
(IEC 61000-6-1:2005)
EN 61000-6-1:2001
Note 2.1
01.12.2009 CENELEC EN 61000-6-2:2001
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
(IEC 61000-6-2:1999 (Modified))
EN 61000-6-2:1999
Note 2.1
Date expired
(01.07.2004) CENELEC EN 61000-6-2:2005
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for industrial environments
(IEC 61000-6-2:2005)
EN 61000-6-2:2001
Note 2.1
01.06.2008 CENELEC EN 61000-6-3:2001
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
(CISPR/IEC 61000-6-3:1996 (Modified))
EN 50081-1:1992
Note 2.1
Date expired
(01.07.2004) Amendment A11:2004 to EN 61000-6-3:2001
Note 3
Date expired
(01.07.2007) CENELEC EN 61000-6-3:2007
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments
(IEC 61000-6-3:2006)
EN 61000-6-3:2001
and its amendment
Note 2.1
01.12.2009 CENELEC EN 61000-6-4:2001
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
(IEC 61000-6-4:1997 (Modified))
EN 50081-2:1993
Note 2.1
Date expired
(01.07.2004) CENELEC EN 61000-6-4:2007
Electromagnetic compatibility (EMC) - Part 6-4: Generic standards - Emission standard for industrial environments
(IEC 61000-6-4:2006)
EN 61000-6-4:2001
Note 2.1
01.12.2009 CENELEC EN 61008-1:1994
Electrical accessories - Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules
(IEC 61008-1:1990 (Modified)
+ A1:1992 (Modified))
-
- Amendment A2:1995 to EN 61008-1:1994
(IEC 61008-1:1990/A2:1995) Relevant generic standard(s)
Note 2.3
Date expired
(01.07.2000) Amendment A14:1998 to EN 61008-1:1994
Relevant generic standard(s)
Note 2.3
Date expired
(01.01.2001) CENELEC EN 61008-1:2004
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB's) - Part 1: General rules
(IEC 61008-1:1996 (Modified)
+ A1:2002 (Modified))
EN 61008-1:1994
and its amendments
Note 2.1
01.04.2009 CENELEC EN 61009-1:1994
Electrical accessories - Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules
(IEC 61009-1:1991 (Modified))
-
- Amendment A1:1995 to EN 61009-1:1994
(IEC 61009-1:1991/A1:1995) Relevant generic standard(s)
Note 2.3
Date expired
(01.07.2000) Amendment A14:1998 to EN 61009-1:1994
Note 3
Date expired
(01.01.2001) CENELEC EN 61009-1:2004
Residual current operated circuit-breakers with integral overcurrent protection for household and similar uses (RCBO's) - Part 1: General rules
(IEC 61009-1:1996 (Modified)
+ A1:2002 (Modified))
EN 61009-1:1994
and its amendments
Note 2.1
01.04.2009 CENELEC EN 61131-2:2003
Programmable controllers - Part 2: Equipment requirements and tests
(IEC 61131-2:2003)
EN 61131-2:1994
+ A11:1996
+ A12:2000
Note 2.1
Date expired
(01.05.2006) CENELEC EN 61204-3:2000
Low voltage power supplies, d.c. output - Part 3: Electromagnetic compatibility (EMC)
(IEC 61204-3:2000)
Relevant generic standard(s)
Note 2.3
Date expired
(01.11.2003) CENELEC EN 61326:1997
Electrical equipment for measurement, control and laboratory use - EMC requirements
(IEC 61326:1997)
Relevant generic standard(s)
Note 2.3
Date expired
(01.07.2001) Amendment A1:1998 to EN 61326:1997
(IEC 61326:1997/A1:1998) Note 3
Date expired
(01.07.2001) Amendment A2:2001 to EN 61326:1997
(IEC 61326:1997/A2:2000) Note 3
Date expired
(01.04.2004) Amendment A3:2003 to EN 61326:1997
(IEC 61326:2002 (Annexes E & F only)
+ IEC ) Note 3
Date expired
(01.10.2006) CENELEC EN 61326-1:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements
(IEC 61326-1:2005)
EN 61326:1997
and its amendments
Note 2.3
01.02.2009 CENELEC EN 61326-2-1:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment for EMC unprotected applications
(IEC 61326-2-1:2005)
EN 61326:1997
and its amendments
Note 2.3
01.02.2009 CENELEC EN 61326-2-2:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring equipment used in low-voltage distribution systems
(IEC 61326-2-2:2005)
EN 61326:1997
and its amendments
Note 2.3
01.02.2009 CENELEC EN 61326-2-3:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote signal conditioning
(IEC 61326-2-3:2006)
EN 61326:1997
and its amendments
Note 2.3
01.08.2009 CENELEC EN 61326-2-4:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to IEC 61557-8 and for equipment for insulation fault location according to IEC 61557-9
(IEC 61326-2-4:2006)
EN 61326:1997
and its amendments
Note 2.3
01.11.2009 CENELEC EN 61326-2-5:2006
Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according to IEC 61784-1, CP 3/2
(IEC 61326-2-5:2006)
EN 61326:1997
and its amendments
Note 2.3
01.09.2009 CENELEC EN 61543:1995
Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility
(IEC 61543:1995)
Relevant generic standard(s)
Note 2.3
Date expired
(04.07.1998) Amendment A11:2003 to EN 61543:1995
Note 3
Date expired
(01.03.2007) Amendment A12:2005 to EN 61543:1995
Note 3
01.03.2008 Amendment A2:2006 to EN 61543:1995
(IEC 61543:1995/A2:2005) Note 3
01.12.2008 CENELEC EN 61547:1995
Equipment for general lighting purposes - EMC immunity requirements
(IEC 61547:1995)
Relevant generic standard(s)
Note 2.3
Date expired
(01.07.1996) Amendment A1:2000 to EN 61547:1995
(IEC 61547:1995/A1:2000) Note 3
Date expired
(01.11.2003) CENELEC EN 61800-3:1996
Adjustable speed electrical power drive systems - Part 3: EMC product standard including specific test methods
(IEC 61800-3:1996)
Relevant generic standard(s)
Note 2.3
Date expired
(01.04.1997) Amendment A11:2000 to EN 61800-3:1996
Note 3
Date expired
(01.01.2002) CENELEC EN 61800-3:2004
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods
(IEC 61800-3:2004)
EN 61800-3:1996
and its amendment
Note 2.1
01.10.2007 CENELEC EN 61812-1:1996
Specified time relays for industrial use - Part 1: Requirements and tests
(IEC 61812-1:1996)
-
- Amendment A11:1999 to EN 61812-1:1996
Relevant generic standard(s)
Note 2.3
Date expired
(01.01.2002) CENELEC EN 62020:1998
Electrical accessories - Residual current monitors for household and similar uses (RCMs)
(IEC 62020:1998)
-
- Amendment A1:2005 to EN 62020:1998
(IEC 62020:1998/A1:2003 (Modified)) Relevant generic standard(s)
Note 2.3
01.03.2008 CENELEC EN 62040-2:2006
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements
(IEC 62040-2:2005)
EN 50091-2:1995
Note 2.1
01.10.2008 CENELEC EN 62052-11:2003
Electricity metering equipment (AC) - General requirements, tests and test conditions - Part 11: Metering equipment
(IEC 62052-11:2003)
Note 9
Relevant generic standard(s)
Note 2.3
Date expired
(01.03.2006) CENELEC EN 62052-21:2004
Electricity metering equipment (a.c.) - General requirements, tests and test conditions - Part 21: Tariff and load control equipment
(IEC 62052-21:2004)
Note 11
EN 61037:1992
+ A1:1996
+ A2:1998
+ EN 61038:1992
+ A1:1996
+ A2:1998
Note 2.1
Date expired
(01.07.2007) CENELEC EN 62053-11:2003
Electricity metering equipment (a.c.) - Particular requirements - Part 11: Electromechanical meters for active energy (classes 0,5, 1 and 2)
(IEC 62053-11:2003)
EN 60521:1995
Note 2.1
Date expired
(01.03.2006) CENELEC EN 62053-21:2003
Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2)
(IEC 62053-21:2003)
EN 61036:1996
+ A1:2000
Note 2.1
Date expired
(01.03.2006) CENELEC EN 62053-22:2003
Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2 S and 0,5 S)
(IEC 62053-22:2003)
EN 60687:1992
Note 2.1
Date expired
(01.03.2006) CENELEC EN 62053-23:2003
Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3)
(IEC 62053-23:2003)
EN 61268:1996
Note 2.1
Date expired
(01.03.2006) CENELEC EN 62054-11:2004
Electricity metering (a.c.) - Tariff and load control - Part 11: Particular requirements for electronic ripple control receivers
(IEC 62054-11:2004)
EN 61037:1992
+ A1:1996
+ A2:1998
Note 2.1
Date expired
(01.07.2007) CENELEC EN 62054-21:2004
Electricity metering (a.c.) - Tariff and load control - Part 21: Particular requirements for time switches
(IEC 62054-21:2004)
EN 61038:1992
+ A1:1996
+ A2:1998
Note 2.1
Date expired
(01.07.2007) CEN EN 617:2001 Continuous handling equipment and systems - Safety and EMC requirements for the equipment for the storage of bulk materials in silos, bunkers, bins and hoppers
— CEN EN 618:2002 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of bulk materials except fixed belt conveyors
— CEN EN 619:2002 Continuous handling equipment and systems - Safety and EMC requirements for equipment for mechanical handling of unit loads
— CEN EN 620:2002 Continuous handling equipment and systems - Safety and EMC requirements for fixed belt conveyors for bulk materials
— CEN EN 1155:1997 Building hardware - Electrically powered hold-open devices for swing doors - Requirements and test methods
— CEN EN 12015:2004 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Emission
EN 12015:1998
Date Expired (30.6.2006)
CEN EN 12016:2004 Electromagnetic compatibility - Product family standard for lifts, escalators and moving walks - Immunity
EN 12016:1998
Date Expired (30.6.2006)
CEN EN 12895:2000 Industrial trucks - Electromagnetic compatibility
— CEN EN 13241-1:2003 Industrial, commercial and garage doors and gates - Product standard - Part 1: Products without fire resistance or smoke control characteristics
— CEN EN 13309:2000 Construction machinery - Electromagnetic compatibility of machines with internal electrical power supply
— CEN EN 14010:2003 Safety of machinery - Equipment for power driven parking of motor vehicles - Safety and EMC requirements for design, manufacturing, erection and commissioning stages
— CEN EN ISO 14982:1998
Agricultural and forestry machines - Electromagnetic compatibility - Test methods and acceptance criteria (ISO 14982:1998)
— ETSI EN 300 386 V1.2.1
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements EN 300 386-2 V1.1.3 31.8.2007 ETSI EN 300 386 V1.3.1
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements EN 300 386-2 V.1.1.3 31.8.2007 ETSI EN 300 386 V1.3.2
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements EN 300 386-2 V.1.1.3 31.8.2007 ETSI EN 300 386 V1.3.3
Electromagnetic compatibility and radio spectrum matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements EN 300 386-2 V1.1.3 31.8.2007 ETSI EN 300 386-2 V1.1.3
Electromagnetic compatibility and Radio spectrum Matters (ERM); Telecommunication network equipment; Electromagnetic compatibility (EMC) requirements; Part 2: Product family standard
General remark: when there is a stroke in column 3 (reference of the superseded standard), it means that the referenced standard may not be used without amendment or particular part for EMC purpose.
Note 1: Generally the date of cessation of presumption of conformity will be the date of withdrawal ( “dow”), set by the European Standardisation Organisation, but attention of users of these standards is drawn to the fact that in certain exceptional cases this can be otherwise.
Note 2.1: The new (or amended) standard has the same scope as the superseded standard. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.
Note 2.2: The new standard has a broader scope than the superseded standard. On the date stated the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.
Note 2.3: The new standard has a narrower scope than the superseded standard. On the date stated the (partially) superseded standard ceases to give presumption of conformity with the essential requirements of the directive for those products that fall within the scope of the new standard. Presumption of conformity with the essential requirements of the directive for products that still fall within the scope of the (partially) superseded standard, but that do not fall within the scope of the new standard, is unaffected.
Note 3: In case of amendments, the referenced standard is EN CCCCC:YYYY, its previous amendments, if any, and the new, quoted amendment. The superseded standard (column 3) therefore consists of EN CCCCC:YYYY and its previous amendments, if any, but without the new quoted amendment. On the date stated, the superseded standard ceases to give presumption of conformity with the essential requirements of the directive.
Example: For EN 55011:2007, the following applies :
CENELEC EN 55011:2007 Industrial, scientific and medical (ISM) radio-frequency equipment - Electromagnetic disturbance characteristics - Limits and methods of measurement
(CISPR 11:2003 (Modified)
+ A1:2004 (Modified))
EN 55011:1998
and its amendments [The superseded standard is EN 55011:1998
+ A1:1999
+A2: 2002 to EN 55011:1998]
01.11.2009 Amendment A2:2007 to EN 55011:2007
(CISPR 11:2003/A2:2006)
Note 3
01.11.2009
Note 6: EN 60947-1:1999 does not give presumption of conformity without another part of the standard. EN 60947-1:2004 does not give presumption of conformity without another part of the standard.
Note 7: EN 60730-1:2000 does not give presumption of conformity without another part of the standard.
Note 8: EN 55012 is applicable for giving presumption of conformity under directive 89/336/EEC for those vehicles, boats and internal combustion engine-driven devices that are not within the scope of directives 95/54/EC, 97/24/EC, 2000/2/EC or 2004/104/EC.
Note 9: EN 62052-11:2003 does not give presumption of conformity without a part of the EN 62053 series.
Note 11: EN 62052-21:2004 does not give presumption of conformity without a part of the EN 62054 series.
Last update: 22/10/2007 ETSI EN 300 386 V1.4.1 (2008-04)
ETSI EN 300 386-2 V1.1.3 (1997-12)
ETSI EN 300 386 V1.3.3 (2005-04)
ETSI EN 300 386 V1.3.2 (2003-05)
ETSI EN 300 386 V1.3.1 (2001-09)
ETSI EN 300 386 V1.2.1 (2000-03)
http://www.angui.org/bbs/read.php?tid=27313 最新版本 2008年11月4日 F老大，现在EMC指令叫Directive 2014/30/EU 老板，麻烦你给个网址不？非常感谢！LVD,ROHS,REACH我都找到了，就是没有看到EMC指令和RED指令下的这些协调标准列表。 赞赞赞，收藏了
页:
[1]
