这是什么试验？
ADHESION TEST:Six molded samples tabulated above were used. The body of each
fitting was fixed in place without restricting vision of the cord entry or
movement of the cord. The cord was firmly grasped in the hand. The cord
was then bent sharply at the cord entry to an angle of 90° from the plane
of the cord entry and visually examined for openings that might permit
entry of moisture into the body. If an area without obvious adhesion
between cord and body was observed, a small portion of the body was cut
away to determine if there was adhesion further inside the body
这个是类似UL817里面的粘结试验 同意楼上。还记得以前做PVC插头配合橡胶线，这个就很难通过，结合很差，根本粘合不了
页:
[1]
