E27 LED灯泡的扭力测试中，球泡上的罩子可以拧下来。不知道这样算不算过
E27 LED灯泡的扭力测试中，球泡上的罩子可以拧下来。不知道这样算不算过你是用手握住罩壳测试的吗?换个位置试一下,比如握持塑包铝的外壳那里 要打胶封死，
4.2 Self-ballasted LED-lamps are non-repairable, factory-sealed units. They shall normally
not be opened for any tests. In the case of doubt based on the inspection of the lamp and the
examination of the circuit diagram, and in agreement with the manufacturer or responsible
vendor, either the output terminals shall be short-circuited or, in agreement with the
manufacturer, lamps specially prepared so that a fault condition can be simulated shall be
submitted for testing (see Clause 13). 如果是SELV的露出来，且是IP20的，掉了没有关系的
DC 60V以下 一般是要打胶固定，不可拆卸。 测试失败 zengvison 发表于 2018-11-6 09:44
测试失败
失败的理由呢，条款是哪条 测试不合格，这有相关的决议要求 uugy911 发表于 2018-11-6 17:02
失败的理由呢，条款是哪条
9.3 Repetition of Clause 8 Compliance criteria
After the mechanical strength test of 9.2, the sample shall comply with the requirements of
accessibility (see Clause 8).
这个能过吗？球泡一般都不会做成隔离了吧。
页:
[1]
2
