出澳洲红外手持式温度计的分类问题
本帖最后由 测试小QE 于 2018-9-19 15:52 编辑大家好，我们有一个红外温度计， 过了EMC认证，现在澳洲客户在追问这个产品的分类，澳洲的分类有一下描述，这个产品不是high risk device我们已经可以确定， 是使用电池操作的，有microprocessor的产品, 我们也可以确认， 问题是过了EMC认证的产品是不是就没有radio emissions have caused, or are likely to cause, interference, disruption or disturbance to other devices or to radiocommunications services？也就是可以划分为LOW RISK DEVICE请各位解惑，谢谢，我对EMC十分陌生
以下是澳洲法规的摘抄
1.8Meaning of medium riskdevice (1)In this Notice, subject to subsection (2), a device is a medium riskdevice if it is not a high risk device and contains 1 or more of the following: (a)a switch mode power supply; (b)a transistor switching circuit; (c)a microprocessor; (d)a commutator; (e)a slip ring motor; (f)an electronic device operating in a switching mode or a non linearmode. (2)A battery powered device is not a medium risk device unless the ACMAhas declared the device to be a medium risk device under subsection (3). (3)The ACMA may declare, in writing, that a particular battery powereddevice specified in the declaration is a medium risk device if: (a)the common operation of the device causes radio emissions; and (b)those radio emissions have caused, or are likely to cause, interference,disruption or disturbance to other devices or to radiocommunications services;and (c)the device is not a high risk device. (4)A declaration under subsection (3) is a notifiableinstrument for the purposes of the Legislation Act 2003
一下是产品过的认证
http://bbs.angui.org/forum.php?mod=image&aid=128244&size=300x300&key=50de8e70f4e48778&nocache=yes&type=fixnone
补充一下，这个产品是使用电池的设备 1. 产品是否带有蓝牙？ 2. 电池供电是使用可充锂电还是普通电池？客户关心的是产品是否干扰到其他设备或无线通信。一般普通产品过了EMS+EMI不会干扰到其他产品工作。 stey 发表于 2018-9-20 10:15
1. 产品是否带有蓝牙？ 2. 电池供电是使用可充锂电还是普通电池？客户关心的是产品是否干扰到其他设备或无 ...
没有蓝牙，使用普通电池供电，不是锂电池，照这么说就是属于low risk device了，多谢回复
页:
[1]
