stey 发表于 2016-6-29 17:45

EN 60968:2015没有60W功率限制了?

查看EN 60968:2015标准的scope时发现,与2013版相比,去掉了60W功率限制,电压放宽到50V。现在60W以上也可用此标准?

以下摘自标准EN 60968:2013:
1 Scope
This International Standard specifies the safety and interchangeability requirements, together
with the test methods and conditions, required to show compliance of tubular fluorescent and
other gas-discharge lamps with integrated means for controlling starting and stable operation
(self-ballasted lamps), intended for domestic and similar general lighting purposes, having:
– a rated wattage up to 60 W;
– a rated voltage of 100 V to 250 V;
– Edison screw or bayonet caps.

以下摘自标准EN 60968:2015:
1 Scope
This International Standard specifies the safety and interchangeability requirements, together
with the test methods and conditions required to show compliance of tubular fluorescent
lamps with integrated means for controlling starting and stable operation (self-ballasted
fluorescent lamps).
These lamps are intended for domestic and similar general lighting purposes, having a rated
voltage of 50 V to 250 V, having a rated frequency of 50 Hz or 60Hz and having IEC 60061-1
compliant caps.
For a cap-holder system not specifically mentioned in this standard, the relevant information
on safety related tests provided by the manufacturer will apply.
The requirements of this standard relate only to type testing.

dabayinzhi168 发表于 2016-6-29 18:55

路过学习

jingzi 发表于 2017-8-26 09:08

标准上没限值功率了

wjl203036 发表于 2017-9-26 15:34

确实没有了哦

rlandg 发表于 2017-9-26 15:56

路过学习:)

ag0819 发表于 2017-10-9 11:48

最新的标准没有限制功率,应该是可以的:lol

raycheng1981 发表于 2017-11-23 16:06

学习了,谢谢
页: [1]
查看完整版本: EN 60968:2015没有60W功率限制了?