ljh809809 发表于 2015-10-23 17:37

IEC 60320-1 clause 13.4 中对器具输入插座插销的压力和拉力试验如何操作？

13.4 The security of the pinretention is checked by inspection and, in case of doubt, by thefollowing test.Each pin is subjected to a force of60 N ± 0,6 N, applied without jerks, in a direction along theaxis of the pin and maintained atthis value for a period of 60 s.For all pins the force is applied,first in the direction away from the base of the appliance inlet,and then in the direction towardsthe base of the appliance inlet.

问题：这里，需要在高温下对器具输入插座插销的压力和拉力试验，请问用何装置如何做此试验？

Nezof 发表于 2015-10-23 17:49

貌似有这样的设备，我在TUV见过

petercheung 发表于 2017-6-10 11:56

今天看懂了

秋天的童话 发表于 2017-8-18 09:54

就是在PIN的轴向方向，轴向反方向拉PIN. 先要放高温箱里，(温度根据 CONDITION 来定，cold condition就是70度），可以用固定的器具，挂砝码来60N. 感觉用推拉力计也可以。
页: [1]
查看完整版本: IEC 60320-1 clause 13.4 中对器具输入插座插销的压力和拉力试验如何操作？