DSH 299 Marking of Battery Terminals
http://decisions.iecee.org/icons/ecblank.gifDSH 299
Marking of Battery Terminals
5.1.8
61010-1(ed.1);am1;am2
Standard:
IEC 61010-1:1990
+A1:1992+A2:1995
Sub clause:
5.1.8
Sheet n. 299
Page 1(1)
Subject:
Marking of Battery Terminals
Key words:
- Battery
- Marking
Decision taken by
ETF3 and confirmed
by CTL at its 38th
meeting, in Toronto
Question:
There is no requirement for the marking of battery terminals. Has this caused difficulty in
test programmes?
Decision:
No marking is required, no difficulties were reported as a consequence.
Explanation:
Clause 13.2.2. requires batteries intended to be changed by the user to be connected in
reverse polarity, if possible, as a type test and this has eliminated hazards.
Note: Care should be taken with certain cells, (eg lithium), when performing this test to
ensure there is no risk of explosion.
页:
[1]
