PDSH 1017 Samples selection (family products)
http://decisions.iecee.org/icons/ecblank.gif PDSH 1017
Samples selection (family products)
5
60921(ed.1);am1;am2 & 60921(ed.2);am1 & 60923(ed.2);am1 & 60923(ed.3);am1 & 61347-2-9(ed.1);am1;am2
Standard(s):
IEC 61347-2-9
IEC 60921
IEC 60923 All editions
Subclause(s): General
No. Year PDSH 1017 2010
Category: LITE Developed by: ETF5 OSM/LUM
Subject:
Samples selection (family products
Key words:
- Samples selection
- Family products
- Ballasts
To be approved at the 49th CTL Plenary Meeting, in 2012
Question:
What samples are to be selected in case of family products?
Decision:
Ballast for tubular fluorescent lamps and discharge lamps. In general it is necessary to carry out the tests
on all the types of ballasts with the following exceptions:
- resistance to heat, fire and tracking - it is possible to test only one type of ballast if the
materials used are identical;
- thermal endurance of winding, (clause 13 IEC 61347-2-8/2-9) – for ballasts of the same
series is sufficient to carry out the test on samples of minimum rated wattages and on the
maximum one. All the intermediate wattages are considered extensions.
The ballasts are considered of the same series if:
- they are covered by the same standard, (e.g. IEC 61347-2-8/2-9);
- they are of the same construction. It means that they have laminations or cores with identical
pattern range, with the same insulating material;
- they have an equal assembly technology;
- they have the same "tw" value. In some cases of ballasts for discharge lamps, for different
types of lamps, (e.g. Hg, HPS, MH) may be of the same series.
页:
[1]
