PDSH 826 Classification and marking of Class II with Class III detachable parts
http://decisions.iecee.org/icons/ecblank.gif PDSH 826
Classification and marking of Class II with Class III detachable parts
Sections 2 and 3
60598-1(ed.3);am1 & 60598-1(ed.4);am1 & 60598-1(ed.5) & 60598-1(ed.6);am1 & 60598-1(ed.7) & EN 60598-1: All editions
Standard(s):
IEC/EN 60598-1 All Editions
Subclause(s): Sections 2 and 3
No. Year DSH 0826 2011
Category: LITE Developed by:
ETF5/OSM/LUM
Subject:
Classification and marking of Class II with Class III detachable parts
Key words:
- Class III
- Marking
- Classification
Approved at the 48th CTL Plenary Meeting, in 2011
Question:
How a product should be marked and/or classified when it consists of a set of:
1. An independent control gear (Class I or Class II) with SELV output
and
2. A luminaire (one or more) which is detachable from the control gear (by hand)?
Decision:
- The independent control gear shall be classified as Class I or Class II;
- The luminaire shall be marked as Class III;
- The whole product may be marked as Class I or Class II on the package. Another way is to mark
the package with the rated voltages of the control gear and the luminaire. Class III marking on the
package may be misleading, and if applied alone, the marking will be incorrect;
- The control gear shall be tested according to Class I or Class II and the luminaire according to
Class III.
页:
[1]
