DSH 488 Supply connection and external flexible cords
http://decisions.iecee.org/icons/ecblank.gif DSH 488
Supply connection and external flexible cords
25
60335-1(ed.3)
Standard: IEC 60335-1:1991, 3rd Ed.
Sub clause: 25
Sheet No. DSH-488
Subject: Supply connection and external flexible cords
Key words: - Plug pins incorporated in appliances
Decision taken at the 40th CTL meeting 2003
Question:
What requirements apply to plug pins incorporated in appliances?
Rationale:
See question.
Decision:
The complete appliance including the plug pins is subjected to the requirements of IEC
60335-1. The plug pins are also subjected to EN 50075 or to the requirements of the relevant
National Standard including the following tumbling barrel test.
The barrel is turned at a rate of five revolutions per minute. The sample falls from a
height of 50 cm onto a steel plate, 3 mm thick, the number of falls being:
- 100 if the mass of the sample does not exceed 250 g
- 50 if the mass of the sample exceeds 250 g.
After the test , the sample shall show no damage within the meaning of this standard, but it
need not be operable.
页:
[1]
