瑞士插头新标准SEV1011:2009变更内容
本帖最后由 13400010226 于 2012-7-9 13:14 编辑attach]74304
thanks for your E-Mail and the request mentioned the renewal of the S+ authorization for the plugs ZH-31, ZH-32 and ZH-33.
Please note following.
The standard SEV 1011 changed in December 2009 from SEV 1011:98 to SEV 1011:09. In the new standard the plugs CH-type 11 and CH-type 12 have part insulated pins, the other plugs and socket outlets should be still the same. During the transition period until 2012/12/31 it is possible to produce plugs and socket outlets according both standards. From 2013/01/01 the plugs and socket outlets have to be produced according SEV 1011:09. You have the possibility to produce and import plugs according SEV 1011:98 with solid pins to Switzerland until 2012/12/31. A information sheet is attached . Your company has already a S+ authorization 11.0135 for the plugs ZH-31 and ZH-32 with part insulated pins according SEV 1011:09.
Do you also have already an updated certificate/test report for the plug ZH-33 according SEV 1011:09. This plug is still with solid pins, but has to meet the requirements of SEV 1011:2009.
Do not hesitate to contact us for further information.
以上是标准的截图翻译过来大概是以下意思：1、瑞士插头型式11和12在插头Pin脚上的采用半绝缘结构，请参考标准SEV1011:2009的SEV 6534-2和 SEV6533-2
2、旧版标准SEV 1011:1991的插头和插座在2012年12月31日后不可申请测试及销售到市场
3、新版标准SEV 1011:2009的插头插座现在就可以测试和销售
4、有以下插头和插座的标准页已修订：型式11,12,13,21,23,15,25
5、2016年12月31日后，参照SEV 1011 6534-1页的12型式插座不可以销售到市场
其实主要变更的就是瑞士插头PIN脚要由全铜改为半绝缘，见如下（仅插头plug)：
谢谢热心分享 标准的欧洲插头是否在瑞士能用呢？
可以用。 例如VDE插头也能用吗？
页:
[1]
